M 9: 30 am 9: 45 am opening Ceremony Room E




НазваниеM 9: 30 am 9: 45 am opening Ceremony Room E
страница1/2
Дата07.10.2012
Размер94.2 Kb.
ТипДокументы
  1   2

 
INTEGRITY   RELIABILITY   FAILURE
An International Conference

UNIVERSITY OF PORTO

Portugal July 19-22, 1999



Schedule of Presentations


Monday July 19, 1999


M 9:30 AM - 9:45 AM Opening Ceremony Room E




Introduction by Professor J.F. Silva Gomes (Co-chair)

Welcome Address by Professor J.C. Marques Santos
Dean of Faculty of Engineering, University of Porto

Briefing by Professor S.A. Meguid (Co-chair)


M 9:45 AM - 10:30 AM Plenary I Room E

PLENARY LECTURE

Computational Modeling of Local Stress Fields and
Delamination in Composite Laminates

Professor J.N. Reddy

Texas A & M, USA

Chair: Professor J.F. Silva Gomes, University of Porto, Portugal


M 10:30 AM - 11:15 AM Plenary II Room E

PLENARY LECTURE

Small Gas Turbine Engines

Technologies for the Next Millennium

Dr. Hany Moustapha

Manager, Turbine Component Center and Technology

Pratt & Whitney Canada Inc., ( Montreal)

Chair: Professor S.A. Meguid, University of Toronto, Canada


M 11:15 AM - 11:30 AM Coffee Break Lounge


M 11:30 AM - 1:00 PM Session 1-A Room A

Symposium: Advanced Modeling and Simulation - I

Organizers: S.A. Meguid1 and J.F. Silva Gomes2

1University of Toronto, Canada, 2University of Porto, Portugal

Chairs: V.K. Kinra, Texas A&M University, USA

N. Ghoniem, University of California at Los Angeles, USA

Keynote Lecture: Multi-scale Modeling of Material Deformation and Failure: A Grand Challenge, Ghoniem, N.M., University of California at Los Angeles, USA

Comparative Stress Analysis in Constructive Orthotropic Ribbed Plate, Kulenovic, Z.H, University of Split, Croatia

Three-Dimensional Finite Element Analysis of Saddle Supported Pressure Vessels, El-Abbasi, N. and Meguid, S.A., Univ. of Toronto, Canada

Effects of Tag Axle on the Static and Dynamic Behaviour of a Heavy Tow Tractor-Towed Vehicle Combination, Tennich, M. and Falah, B., Univ. du Québec à Rimouski, Canada

Study of Boundary Friction Between Running-In Materials, Nogueira, I., Dias, A.M., Progri, R. and Gras, R., Instituto Politécnico de Tomar, Portugal


M 11:30 AM - 1:00 PM Session 1-B Room B

Symposium: Reliability and Efficiency of Numerical Tools in
Engineering Analysis and Practice - I


Organizers: J.M.A.C. Sá1, L.M.P.A.C. Sousa1, R.M.N. Jorge1 and D.R.J. Owen2

1University of Porto, Portugal, 2University of Wales Swansea, UK

Chairs: D.R.J. Owen, University of Wales, UK

J.M.A.C. Sá, University of Porto, Portugal

Keynote Lecture: Enhanced Strain Elements in Adaptive Solutions for Incompressible Forming Processes, Sá, J.M.C., Jorge, R.M.N. Sousa, L.C. and Cardoso, R.P.R., University of Porto, Portugal

Reliability Analysis of Steel Connections Components Based on FEM, Cruz, P.J.S., Henriques, A.A.R. and Neves, L.A.C., University of Minho, Portugal

On the Use of a Special Class of Cohesive Finite Elements for the Analysis of Three-Dimensional Fatigue Crack Growth, Andrés, A., Pérez-Aparício, J.L. and López, O., University of Pontificia Comillas, Spain

Simulation Model for Hot Forging with Adaptive Mesh Refinement, Sousa, L.C., Sá, J.M.A.C. and Pires, F.M.A., University of Porto, Portugal

Simplified Dynamic Modeling of the Harmonic Response of a Bolted Interface, Lavabre, R. and Combes, B., Institute National des Sciences Appliquées, France


M 11:30 AM - 1:00 PM Session 1-C Room C

Symposium: Crashworthiness - I

Organizer: Carlos Ruiz, Oxford University, UK

Chairs: N. Jones, The University of Liverpool, UK

M. Langseth, Norwegian University of Science & Technology, Norway

Keynote Lecture: Dynamic Axial Crushing of Thin-Walled Structures, Jones, N., The University of Liverpool, U.K

Experimental Set-Up for Dynamic Fracture of Materials at High Temperature, Guillaumat, L., Collombet, F. and Lataillade, J.L., E.N.S.A.M., France

Ballistic Impact on Ceramic Metal Armours, Gálvez, V.S. and Gálvez, F., Polytechnic University of Madrid, Spain

Experimental Investigation to Evaluate the Effect of the Included Angle of a Folded "V" Shape Plate for Blast Resistance, Nurick, G.N. and Lockley, J.P., University of Cape Town, South Africa

Quasi-Static Penetration of Steel Plates, Borvik, T. and Langseth, M., Norwegian University of Science & Technology, Norway


M 11:30 AM - 1:00 PM Session 1-D Room D

Symposium: Advanced Composite Materials - I

Organizers: J.F. Silva Gomes1 and S.A. Meguid2

1University of Porto, Portugal, 2University of Toronto, Canada

Chairs: H. Sosa, Drexel University, USA

E.V. Morozov, University of Natal, South Africa

Keynote Lecture: Durability Analysis of Polymer Matrix Composites for the Reliability Analysis of Structural Components, Cardon, A.H., Bouquet, P., Vossole and C.V., Free University of Brussels (COSARGUB), Belgium

Application of Shape Memory Alloys for Seismic Isolation, Saadat, S., Salichs, J., Noori, M., Hou, Z. and Davoodi, H., Worcester Polytechnic Institute

Failure Behaviour of a Glass Fabric Laminates and its Dependence on Resin Matrix and Temperature, Schmidt, J., Baran, I. and Golaski, L., Foundry Research Institute Krakow, Poland

Static and Dynamic Behaviour of Composite Riveted Joints, Li, Q.M., Mines, R.A.W. and Birch, R.S., The Univ. of Liverpool, UK

Nonlinear Analysis of Reinforced Shell Structures, Barbosa, J.T. and Dinis, L.S. and Rua dos Bragas, Portugal


M 1:00 PM - 2:00 PM Lunch Cafeteria


M 2:00 PM - 2:45 PM Plenary III Room E

PLENARY LECTURE

Mechanical Integrity of Aeroengine Fan Disc Assembly

Professor C. Ruiz

Oxford University, UK

Chair: Professor S.A. Meguid, University of Toronto, Canada


M 2:45 PM - 4:15 PM Session 2-A Room A

Symposium: Structural Optimization - I

Organizers: C.C. António and A.F.M. Azevedo, University of Porto, Portugal

Chairs: C.C. António, University of Porto, Portugal

A.F.M. Azevedo, University of Porto, Portugal

Keynote Lecture: Genetic and Random Search Methods in Optimal Shape Design Problems, Haslinger, J., KFK- MFF- UK, Czech Republic

Optimal Design of Stiffened Composite Structures Under Buckling Loads: An Inverse Approach, António, C.C. and Barbosa, J.T., University of Porto, Portugal

Optimal Design of Metal Forming Process Parameters, Castro, C.F., Sousa, L.C. António, C.A.C. and Sá, J.C., University of Porto, Portugal

An Adjoint Variable Method for the Thermal Shape Optimization of Two-Dimensional Structures, Younes, M. and Potiron, A., ENSAM CER d'Angers, France

Optimal Design of Structural Elements, Vavro, J. and Kopecky, M., University of Trencin, Slovakia


M 2:45 PM - 4:15 PM Session 2-B Room B

Symposium: Micromechanics, Damage and Failure- I

Organizers: S.A. Meguid1 and J.F. Silva Gomes2

1University of Toronto, Canada, 2University of Porto, Portugal,

Chairs: S.K. Datta, University of Colorado Boulder, USA

K.H. Laermann, University of Bergische, Germany

Keynote Lecture: Plane Strain Wave Scattering by a Vertical Crack in a Coated Steel Plate, Datta, S.K., Rogers, J. and Shah, A.H., University of Colorado Boulder, USA

Failure of Supporting Rings in a Generator Diesel Engine, Ferraz, M.T., Faustino, J. Santos, M. and Gomes, C., Institute of Materials and Production Technologies, Portugal

Failure Analysis of Straight Intramedullary Femoral Nail, Ferraz, M.T., Faustino, J. and Santos, M., Institute of Materials and Production Technologies, Portugal

Prediction of Fatigue Life Under Random Loading, Jelaska, D., Nini, N. and Grljusi, M., University of Split, Croatia

Environmentally Assisted Failures: Case Histories, Shipilov, S.A., Russian Academy of Sciences, Russia


M 2:45 PM - 4:15 PM Session 2-C Room C

Symposium: Testing and Diagnostics - I

Organizer: J.F. Silva Gomes, University of Porto, Portugal

Chairs: E.A. Elsayed, Rutgers University, USA

G. Mimmi, Univ. degli Studi di Pavia, Italy

Keynote Lecture: Simultaneous Measurement of Acoustical Parameters of a Layered Medium: The Inverse Problem, Kinra, V.K., Texas A&M University, USA

Magnetovision: A New Tool in Fatigue Investigations, Kaleta, J. and Susz, S., Wroclaw University of Technology, Poland

The Use of Experimental Design in a Bolted Joint, Lakiss, H., Daidie, A. and Guillot, J., Institut National des Sciences Appliquées, France

Numerical Methods to Avoid Failure During the In-Service Welding of Gas Pipelines, Sabapathy, P., Wahab, M.A. and Painter, M.J., The University of Adelaide, Australia

Design and Analysis of Experiments Involving Censored Failure Data, Fard, N.S. and Chowdhury, A.H., Northeastern University, USA


M 2:45 PM - 4:15 PM Session 2-D Room D

Symposium: Joining of Composite & Sandwich Structures - I

Organizers: A.T. Marques1, A. Cardon2 and A. Ferreira1

1University of Porto, Portugal, 2Free University of Brussels, Belgium

Chairs: A. Ferreira, University of Porto, Portugal

A.T. Marques, University of Porto, Portugal

Keynote Lecture: Modeling of Honeycomb Structures by the Finite Element Method, Ferreira, A.J.M., Marques, A.T. and Sá, J.C., University of Porto, Portugal

Low Speed Impact of Laminates Reinforced with Polyethylene or Aramidic Fibers Silva, M.A.G, University of Lisboa, Portugal

Full-Scale Testing of Underground Composite Tanks, Costa, A.N. and Marques, A.T., University of Porto, Portugal

Analysis of RC Beams Reinforced with FRP Re-bars by Finite Elements, Ferreira, A.J.M., Marques, A.T., Sá, J.C. and Fernandes, A.A., University of Porto, Portugal

Buckling Behaviour of Composite Shells, Ferreira, A.J.M. and Barbosa, J.T., University of Porto, Portugal


M 4:15 PM - 4:30 PM Coffee Break Lounge


M 4:30 PM - 6:00 PM Session 3-A Room A

Symposium: Advanced Modeling and Simulation - II

Organizers: S.A. Meguid1 and J.F. Silva Gomes2

1University of Toronto, Canada, 2University of Porto, Portugal

Chairs: J.N. Reddy, Texas A&M University, USA

H. Sosa, Drexel University, USA

Keynote Lecture: Using Small Beam Centrifuge in Analyzing Behaviour of Geotechnical Structures, Allersma, H.G.B., Delft University of Technology, Netherlands

Effects of FGM on the Parametric Resonance of Plate and Shell Structures, Yong, N.T., Yong, L.K. and Liew, K.M., Institute of High Performance Computing, Singapore

Elastodynamic Response of Ordered and Disordered Materials, Kinra, V.K., Maslov, K. and Henderson, B.K., Texas A&M University, USA

Elastodynamic Analysis of Frictional Contact Problems using Variational Inequalities, Czekanski, A. and Meguid, S.A., University of Toronto, Canada


M 4:30 PM - 6:00 PM Session 3-B Room B

Symposium: Reliability and Failure of Thin and Thick Coatings - I

Organizer: M. Andritschky and V. Teixeira, University of Minho, Portugal

Chairs: M. Andritschky, University of Minho, Portugal

F. Schubert, Institute for Materials and Processes, Germany

Keynote Lecture: Residual Stress Analysis in Graded Thermal Barrier Coatings, Teixeira, V., Andritschky, M. and Stover, D., University of Minho, Portugal

A Dynamic Finite Element Simulation for the Optimisation of Shot Peening Process, Deslaef, D. Rouhaud, E., Univ. de Technologie de Troyes, France

Influence of Ultrasonic Shot-Peening on the Fatigue Behaviour of a 41CR4 Steel, Retraint, D., Garnier, G., Guelorget, B. and Lu, J., Univ. de Technologie de Troyes, France

Damage Mechanisms in High Temperature Protective Coatings, Teixeira, V., Andritschky, M. and Stover, D., University of Minho, Portugal

Influence of Deposition Parameters on the Properties of Gas Sensor Thin Layers Prepared by Magnetron Sputtering, Pires, J.M.C., Teixeira, V., Almeida, J.B. and Reis, M., University of Minho, Portugal


M 4:30 PM - 6:00 PM Session 3-C Room C

Symposium: Advanced Nondestructive Techniques - I

Organizer: Mário A.P. Vaz, University of Porto, Portugal

Chairs: K.H. Laermann, University of Bergische, Germany

Mário A.P. Vaz, University of Porto, Portugal

Keynote Lecture: Pseudo-Dynamic Techniques in Structural Analysis and Design, Melo, F.Q., Carneiro, J.O. and Silva Gomes, J.F., University of Porto, Portugal

  • New Territory of Experimental Mechanics, Egawa, K. and Kikuchi, S., Niigata Institute of Technology, Japan

Shearography with Pulsed Lasers, Santos, F.M. and Vaz, M.A.P., University of Porto, Portugal

The Dynamic Analysis of a Piping System Detail Using Pseudodynamic Techniques, Carneiro, J.O., Lopes H., Rodrigues, J.D ,Melo, F.Q. and Silva Gomes, J.F., University of Minho, Portugal

Vibration Analysis of a Beam Using Modal Dynamic Approach and Pseudodynamic Techniques, Carneiro, J.O., Rodrigues, J.D ,Melo, F.Q. and Silva Gomes, J.F., University of Minho, Portugal


M 4:30 PM - 6:00 PM Session 3-D Room D

Symposium: Optimal Design Engineering - I

Organizers: J.F. Silva Gomes1 and S.A. Meguid2

1University of Porto, Portugal, 2University of Toronto, Canada

Chairs: K.M. Liew, Nanyang Technological University, Singapore

Haslinger, J., KFK- MFF- UK, Czech Republic

Reliability Evaluation of Torsional Problems Using Stochastic FEM, Zucchelli, A., Moncelsi, F. and Minak, G., University of Bologna, Italy

The Principles of Simultaneous Engineering Applied to New Orientation for Product Development, Faria, L.O., Instituto Superior Técnico, Portugal

Failure Analysis of a Water Pump Shaft, Faustino, J.,Ferraz, M.T. Santos, M. and Gomes, C., Institute of Materials and Production Technologies, Portugal

One Approach to Limit State Design, Jelaska, I., Jelaska, D., University of Zagreb, Croatia

Reliability and Failure of Rubble Mound Breakwaters, Pinto, F.T. and Gomes, F.V., University of Porto, Portugal


Tuesday July 20, 1999


T 9:00 AM - 9:45 AM Plenary IV Room E

PLENARY LECTURE

Computational Strategies for Industrial problems with
Evolving Geometries and Multiple Fracturing

Professor D.R.J. Owen

University of Wales, UK

Chair: Professor J.F. Silva Gomes, University of Porto, Portugal


T 9:45 AM - 11:15 AM Session 4-A Room A

Symposium: Testing and Diagnostics - II

Organizer: J.F. Silva Gomes, University of Porto, Portugal

Chairs: D. Dunlap, ALCOA, USA

E.A. Elsayed, Rutgers University, USA

Keynote Lecture: Reliability Prediction Based on Accelerated Life Testing, Elsayed, E.A., Rutgers University, USA

Direct Visual Observation of Failure Locations in Ductile Members Using Luders Band, Taniuchi, K., Ichinose, K. and Fukuda, K., Meiji University, Japan

Numerical and Experimental Techniques for Enhancing the Reliability of Production Centers, Dunlap, L.D., Alcoa Technical Center, USA

An Experimental Study of the Geometry of the Necking in Tensile Specimens, Andrianopoulos, N.P., Vougiouka, G., The National Technical University of Athens, Greece


T 9:45 AM - 11:15 AM Session 4-B Room B

Symposium: Micromechanics, Damage and Failure- II

Organizers: S.A. Meguid1 and J.F. Silva Gomes2

1University of Toronto, Canada, 2University of Porto, Portugal

Chairs: V. Gupta, University of California at Los Angleles, USA

E.V. Morozov, University of Natal, South Africa

Keynote Lecture: Proper Defect Density Parameters for Anisotropic Solids with Cracks and Holes, Tsukrov, I. and Kachanov, M., University of New Hampshire, USA

Non-Linear Failure Analysis of Reinforced Concrete Elements Based on Latin Hypercube Sampling, Delgado, J., Azeredo, M. and Delgado, R., Polytechnic Institute of Viana do Castelo, Portugal

Designing Against Fatigue: Evaluation of Interacting Features in Aircraft Design, Graham, R.H., Raines, M. and Swift, K.G. University of Hull, UK

Deterministic Model for Predicting Stress Corrosion Cracking, Magalhães, J.F., FEUP, Portugal

Failure Data Analysis for Electromechanical Component, Minak, G., Zucchelli, A.; Massimo, S., University of Bologna, Italy


T 9:45 AM - 11:15 AM Session 4-C Room C

Symposium: Advanced Nondestructive Techniques - II

Organizer: Mário A.P. Vaz, University of Porto, Portugal


Chairs: Mário A.P. Vaz, University of Porto, Portugal

V. Sanchez Gálvez, Polytechnic University of Madrid, Spain

Keynote Lecture: Dynamic Characterization of Structures Using Holographic Interferometry Techniques, Vaz, M.A.P., Santos, F.M. and Monteiro, J., University of Porto, Portugal

Assessment of the stress-intensity factor of a part-through crack in a plate by holographic interferometry, Melo, F.Q., Monteiro, J.M., Vaz, M.A.P. and Silva Gomes, J.F., University of Porto, Portugal

Image Processing Aided Shearography for Composite Materials: Non-Destructive Damage Detection, Chousal, J.A. and Silva Gomes, J.F., University of Porto, Portugal

Nondestructive Measurements of Random Signals in Industrial Conditions and their Analysis, Kopecky, M. and Vavro, J., University of Trencin, Slovakia

Photoelastic Analysis of the Stress Field on Structural Adhesive Joints, Ribeiro, J.E. and Esteves, J.L.S., ESTIG/IPB-Instituto Politécnico de Bragança, Portugal


T 9:45 AM - 11:15 AM Session 4-D Room D

Symposium: Optimal Design Engineering - II

Organizers: J.F. Silva Gomes1 and S.A. Meguid2

1University of Porto, Portugal, 2University of Toronto, Canada

Chairs: J.N. Reddy, Texas A&M University, USA

R. Gentle, Nottingham Trent University, UK

Keynote Lecture: Diaphragm Design Improvement for a Metering Pump, Mimmi, G. and Pennacchi, P., Univ. degli Studi di Pavia, Italy

Virtual thermal expansion – an adaptation of rolling bearing life equations to include slip, Gentle, R., Nottingham Trent University, UK

Structural Design of a Sandwich Coupling Section for a Chassisless Semitrailer, Schellens, H.J., Eindhoven University of Technology

Structural Design of an Integrated Axle Frame for a Closed Box Chassisless Semitrailer, Schellens, H.J. and Correia, N.C., Eindhoven University of Technology

Optimizing the Repair-Limit Replacement Schedule with Discounting and Imperfect Repair, Dohi, T., Ashioka, A., Kaio, N. and Osaki, S., Hiroshima Univ., Japan



  1   2

Похожие:

M 9: 30 am 9: 45 am opening Ceremony Room E iconOpening Ceremony and Committees Address by General Chair and Program Chair

M 9: 30 am 9: 45 am opening Ceremony Room E iconOpening Remarks

M 9: 30 am 9: 45 am opening Ceremony Room E iconOpening notes for the teacher

M 9: 30 am 9: 45 am opening Ceremony Room E icon09: 30 – 10: 30 Opening Session (Hall 1)

M 9: 30 am 9: 45 am opening Ceremony Room E iconOpening our hearts to mother earth

M 9: 30 am 9: 45 am opening Ceremony Room E iconOpening Poems by Emily Dickinson (1830-1886)

M 9: 30 am 9: 45 am opening Ceremony Room E icon) Opening Lecture: Neuroradiology: from ethics to nanotechnologies (L. Picard

M 9: 30 am 9: 45 am opening Ceremony Room E iconİzmir counts down to opening of natural life park

M 9: 30 am 9: 45 am opening Ceremony Room E icon08: 30 Opening Remarks and Prizes ( Track A, Imperial Ballroom )

M 9: 30 am 9: 45 am opening Ceremony Room E icon7: 00 p m. Opening Reception/Award: Thomas F. McGann Prize

Разместите кнопку на своём сайте:
Библиотека


База данных защищена авторским правом ©lib.znate.ru 2014
обратиться к администрации
Библиотека
Главная страница