School of Materials Science and Engineering




Скачать 273.01 Kb.
НазваниеSchool of Materials Science and Engineering
страница3/6
Дата05.10.2012
Размер273.01 Kb.
ТипДокументы
1   2   3   4   5   6

Books Published:

  1. "Advances in Superplasticity and Superplastic Forming", Edited by N. Chandra, H. Garmestani, R. E. Goforth, A TMS Publication, Proceedings of a Symposium sponsored by the MDMD Shaping and Forming Committee, held at the TMS/ASM Materials Week 2-5 November, 1992.

  2. Deformation and failure modes in multiphase materials”, Zikry MA, Garmestani H, Special issue: Int. J. Plasticity 14: (8) 671-671 1998

  3. Special issue on: "Inelastic Deformation and Failure" in honor of Professor E.W. Hart on his 80th birthday – Editorial, INT J PLASTICITY 17 (10): 1303-1304 2001.


Laboratory Manual:

"Experimental Methods in Solid Mechanics," H. Garmestani, Used for the junior level course in experimental mechanics in the Dept. of Mechanical Engineering at FAMU/FSU College of Engineering.


Proceedings:

(2011)

  1. Zohreh Razavi Hesabi, Nageh Allam, Klaus Dahmen, Hamid Garmestani and Mostafa El-Sayed,Enhanced Photo-Assisted Water Splitting Using Titanium-Niobium Mixed Oxide Nanotubes/CNTs Hybrid Electrodes , 2011 MRS Fall meeting & Exhibit, Nov. 28-Dec 2, 2011, Hynes Convention Center, Boston, MA

  2. Zohreh Razavi Hesabi, Nageh Allam, Hossein Sojoudi, Klaus Dahmen, Hamid Garmestani and Mostafa Elsayed; TiO2 Nanotubes/CNTs/Graphene Heterojunction Electrodes for Solar Energy-Driven Applications, 2011 MRS Fall meeting & Exhibit, Nov. 28-Dec 2, 2011, Hynes Convention Center, Boston, MA


(2009)

  1. Majid Baniassadi, Akbar Ghazavizadeh, Masoud Safdari, Hamid Garmestani, Said AHZI, Effect of Mechanical Deformation on Electrical Percolation of CNT Polymer

Composites, Proceedings of the ASME 2009 International Mechanical Engineering, Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

  1. Effect of Low Field Magnetic Annealing on the Viscoelastic Behavior of a Structural Epoxy, Mehran Tehrani, Marwan Al-Haik Hamid Garmestani, Dongsheng Li,Proceedings of 2009 ASME International Mechanical Engineering Congress and Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

  2. H. Garmestani, “Effect of Deformation History on Magnetic Processing of Materials”, May 12, 2008, Presented to IMAP3 Tokeo, Japan,

  3. Multiphysics Approach for the Behavior of Polymers and Polymer-based Nanomaterials, Proceedings of third International Conferences on Polymer Behavior, Nov 3-7, 2008, Marrakech, Morocco

  4. Hoda Amani Hamedani, Klaus-Hermann Dahmen, Dongsheng Li, Hamid Garmestani, Effect Of Spray Parameters On The Microstructure Of La1-Xsrxmno3 Cathode Prepared By Spray Pyrolysis, accepted for publication in 32nd international conference & exposition on advanced ceramics & composites January 27–February 1, 2008, Daytona Beach, Florida USA

  5. Microstructure Design Using Statistical Correlation Functions. Hamid Garmestani, School of Mechanical and Materials Engineering, Georgia Institute of Technology, presented to the First American Academy of Mechanics, New Orleans, June 17-20 (keynote talk);

  6. Microstructure Design and Realization of Nanocomposite Structures, Hamid Garmestani, 2nd International Joint Conference On Composite Engineering 8-11 July 2008, Vancouver Canada. (Keynote)


(2007)

  1. Controlling Residual Stress in Metal Matrix Ceramic Fiber Composite Marwan S Al-Haik, Hamid Garmestani, and Yousef Haik, Mater. Res. Soc. Symp. Proc. Vol. 977 © 2007 Materials Research Society 0977-FF03-03.

  2. “Soft Magnet Multi Property Microstructure Design”, D. Li. H. Garmestani, G. Vialle, The 13th International Symposium on Plasticity and Its Current Applications, June 2-6, 2007, Alaska,

  3. “Microstructure Sensitive Design and Quantitative Prediction of Effective Conductivity in Fuel Cell Design”, D. Li. H. Garmestani, The 13th International Symposium on Plasticity and Its Current Applications, June 2-6, 2007, Alaska.

  4. Texture Prediction of cold and warm rolled Titanium using processing path model, J. Bouhattate1, D.S. Li2, G. Castello-Branco3, H. Garmestani, Germany conference on Knowledge management, July 3, 2007

  5. H. Garmestani, D.S. Li, M.A. Khaleel. Microstructure sensitive design and quantitative prediction of effective conductivity in fuel cell design. Proceedings of PRICM6 (the sixth Pacific Rim International Conference on Advanced Materials and Processing), 2007, 315-318.

  6. Influence Functions for Fatigue Microcrack Driving Force as an Efficient Alternative to Finite Element Analysis for Exploration of Microstructure-Property Relations within Very High Cycle Fatigue Regime: Nima Salajegheh, David L. McDowell, Hamid Garmestani, Rajesh Prasanna, Georgia Institute of Technology, USA, presented to Fourth International Conference on Very High Cycle Fatigue August 19-22, 2007


(2006)

  1. Microstructure and Mechanical Properties of Rolled Sheet and Forged Block Gamma-Titanium Aluminides: Russell J. Foon; Julius De Rojas1; Sun Hyung Kim; Nicole Sporer1; Richard Clark; John Ogren; Omar Es- Said; Kyle Mori; Elizabeth Villalobos1; Hamid Garmestani; Dongsheng Li; Gopal Das; Titanium Alloys for High Temperature Applications - A Symposium Dedicated to the Memory of Dr. Martin Blackburn: Titanium Based Intermetallic Alloys for High Temperature Applications – Gamma, 2006 TMS Annual Meeting, San Antonio, TX, March 14, 2006.

  2. Processing Path Design and the Integration of Texture and Micro- Texture Evolution: Hamid Garmestani Amiya Mukherjee Symposium on Processing and Mechanical Response of Engineering Materials: Modeling of Material Behavior Sponsored by: The Minerals, Metals and Materials Society, TMS Materials Processing and Manufacturing Division, TMS Structural Materials Division, TMS/ASM: Mechanical Behavior of Materials Committee, TMS: Shaping and Forming Committee, 2006 TMS Annual Meeting, San Antonio, TX, March 14, 2006

  3. H. Garmestani, “Statistical Distribution Functions for Multi-Scale Design of Materials”, Presented to University of Luxembourg and Henri Tudor Research center, June 23rd, 2006.

  4. H. Garmestani, “Statistical Correlation Functions as a Tool for Microstructural Design”, Presented to Northwest Consortium for Multiscale Mathematics and Applications Multiscale Modeling of Materials: Mathematics and Computation May 25-30, 2006. University of Puget Sound, Tacoma, WA.


(2005)

  1. B. Z. Cui , K. Han , H. Garmestani , N. M. Dempsey , J. P. Liu , H. J. Schneider-Muntau, “Magnetic Properties of FePt and FePtAg Nanostructured Magnets by Cyclic Cold Rolling”, 50th MMM Conference (10/30/05-11/03/05), San Jose, California

  2. C. M. B. Bacaltchuk, G. A. Castello-Branco, H. Garmestani, “High Magnetic Effects on Texture of Grain-Non Oriented Silicon Steel”, Proceeding of the 1st International Conference on Diffusion in Solids and Liquids. DSL-2005, July 6-8, University of Aveiro, Aveiro, Portugal.

  3. H. Garmestani, D.S. Li, J. Bouhattate, S. Ahzi, and M. Khaleel, Processing Path Model to Describe Texture Evolution During Mechanical Processing, Proceeding of the ICOTOM 14, July 11-July 15, 2005, Leuven, Belgium.

  4. C.M.B. Bacaltchuk, G.A. Castello-Branco1, H. Garmestani1, Magnetic Field effect on the microstructure of low Silicon Steel, Proceeding of the ICOTOM 14, July 11-July 15, 2005, Leuven, Belgium.

  5. M. Iskandar, O. Essaid, et. Al. and H. Garmestani, “The Effect of Rolling Mode on the Mechanical Strength and Crystallographic Texture of Rhenium Metal” Proceeding of the 16th International Plansee Conference on Refractory Materials (May 2005).



(2004)

  1. G. Saheli, H. Garmestani, A. Gokhale, “Effective Elastic Properties of an Al-SiC Composite Using Two-point Statistical Mechanics Approach”, The 8th International Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2004, June 13-17, 2004, Ohio State University, US

  2. B. Z. Cui, C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, H. J. Schneider-Muntau Magnetization Reversal and Nanostructure Refinement in Magnetically Annealed Nd2Fe14B/a-Fe-type Nanocomposites, accepted by the 49th MMM Conference and will appear on JAP, 2005.

  3. B. Z. Cui, k. Han , h. Garmestani , h. J. Schneider-muntau, j. H. Su, j. P. Liu, enhancement of the material properties by magnetic field assisted phase transformation, International Workshop on Materials Analysis and Processing in Magnetic Fields Tallahassee, FL, March 2004, in press.

  4. B. Z. Cui, K. Han, H. Garmestani, H. Schneider-Muntau, J. P. Liu, “Nanostructure, Crystallographic Texture, Exchange Coupling, In-plan Magnetic Anisotropy and Hard Magnetic Properties of Nd2Fe14B/a-Fe-type Nanocomposites Prepared by Magnetic Annealing”, DARPA MetaMaterials PI Review (abstract), Colorado Springs, CO, USA, August 4-7 (2003) Part II, p11.

  5. B. Z. Cui, C. T. Yu, K. Han, J. P. Liu, H. Garmestani, M. J. Pechan, H. J. Schneider-Muntau Magnetization Reversal, Nanostructure Optimization and Magnetic Property Enhancement in Magnetically Annealed Nd2Fe14B/-Fe-type Nanocomposites, Proceeding of 2004 MMM conference.


(2003)

  1. D.S. Li, H. Garmestani, “Processing Path of Crystal Orientation Coefficient during Plastic Deformation”, Dislocations, Plasticity and Metal Forming, ISBN 0-9659463-4-7, Published by NEAT Press, 2003, 487-489.

  2. G. Saheli, A. Belvin, H. Garmestani, and B. L. Adams, “Microstructure sensitive design for a two-phase composite material”, PLASTICITY 2003, July 7-11, 2003, Quebec City.

  3. D.S. Li, H. Garmestani. A Linear Model of Processing Path in Cubic-Orthotropic System. Multiscale modeling and characterization of elastic inelastic behavior of engineering materials, Published by Kluwer, Eds: S. Ahzi et al., 2003, pp. 307-314

  4. D.S. Li, H. Garmestani, “Prediction of Texture Coefficients Evolution During Bulk Deformation”, Twelfth Symposium on Processing and Fabrication of Advanced Materials, Oct. 2003.

  5. D.S. Li, H. Garmestani. Modeling of Processing Path in Processing of Titanium. Proceedings of International Light Metals Conference 2003.

  6. H. Garmestani, G. Saheli, D. L. Li, “Microstructure Sensitive Design of Two Phase composites”, 7th US National Congress on Computational Mechanics at Albuquerque, New Mexico, July 27-31, 2003.

  7. Frank Johnson,…Crystallization, Morphology and Magnetic Properties of Melt-spun (Nd,Pr,Dy)2(Fe,Co,Mo)14B/[[alpha]] Fe Nanocomposites ID: TMAG-03-10-0233, MMM conference, 2003

  8. BauZhi,..Induced anisotropy in FeCo-based nanocrystalline ferromagnetic alloys (HITPERM) by very high field annealing, ID: TMAG-03-10-0248, 2003

  9. H. Garmestani, G. Saheli, G. A. Castello-Branco, Brent Adams - AIAA, 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, Georgia, September 4-6, 2003.

  10. C. M. B. Bacaltchuk, G. A. Castello-Branco, M. Ebrahimi, H. Garmestani and A. D. Rollett - 2003 TMS ANNUAL MEETING · San Diego, California , March 2003.

  11. G.A.Castello-Branco, C.M.B.Bacaltchuk, H.Garmestani - Proceedings of the THERMEC’2003 Conference – Madrid, Spain - July/03

  12. G.A.Castello-Branco, C.M.B.Bacaltchuk, S. L. Semiatin, S. E. Schoenfeld, H.Garmestani - Proceedings of the TI-2003, 10th International Conference in Titanium, Hamburg, Germany – July 2003

  13. G.A.Castello-Branco, C.M.B.Bacaltchuk, S. L. Semiatin, S. E. Schoenfeld, H.Garmestani - 2003 MS&T '03: Materials Science & Technology, Symposium Name: General Abstracts 2003, Chicago, Illinoys, November 2003

  14. G.A.Castello-Branco, C.M.B.Bacaltchuk, J. C. Fanning, H.Garmestani- 2003 MS&T '03: Materials Science & Technology 2003- Symposium:Processing and Properties of Structural Materials,Chicago, Illinoys, November 2003

  15. C.M.B.Bacaltchuk, G.A.Castello-Branco, H.Garmestani - 2003 MS&T '03: Materials Science & Technology, Symposium: Processing-Structure-Property-Performance Relationships,Chicago, Illinoys, November 2003

  16. Arun Gokali, A. Tewari H. Garmestani, Utility of geometric constrains for modeling two-point correlation functions, PLASTICITY 2003, Quebec City July 7-11

  17. H. Garmestani A. Belvin, G. Saheli, H. Garmestani and B. L. Adams, Microstructure sensitive design for a two-phase composite material, PLASTICITY 2003, Quebec City July 7-11

  18. (2002)

  19. D. Li; H. Garmestani, “Influence of Branch Length on the Texture Evolution of Linear Low Density Polyethylene”, Bulletin of America Physics Society, March meeting, 2002, 309

  20. L. Zhu, A. J. Beaudoin, H. Garmestani and S. R. MacEwen “Stress Relaxation of a Work-Hardened Aluminum Magnesium Alloy and application to Hart’s model” TMS Annual Meeting, Columbus, Ohio, October 6-9th, 2002

  21. S.S. Yan; M. Elkawni; D. Li; H. Garmestani etc, “Experimental and Theoretical study on Soft/Hard Exchange-coupled NiFe/SmFe Bilayers”, DARPA MetaMaterials PI Review, 2002, p22

  22. “Statistical Mechanics Analysis of Heterogeneity”, Presented to IUTAM conference in Morocco, October 20-24th, 2002, Marakesh, Morocco.

  23. M.S. Al-Haik and H. Garmestani, G. Jefferson” Modeling of Process Induced Residual Stress in Gamma Titanium Composite”, The Materials Information Society (ASM) 11th International Symposium on Processing and Fabrication of Advanced Materials, Materials Solutions Conference, Columbus Ohio, October 7-9 2002.

  24. H. Garmestani, G. Saheli, G. Bronco, Optimization of microstructure in Ti-6Al-4V using statistical continuum mechanics, Proceeding of the AIAA/ISSMO Symposium and Exhibit on Multidisciplinary Analysis and Optimization, Grand Hyatt Atlanta, Georgia, 4-6 September 2002.

  25. G. Jefferson, H. Garmestani, B. L. Adams, Two point Distribution Functions and application to Co-Copolymers, Proceeding of the Plasticity Conference in Aruba, January 3-9, 2002.

  26. H. Garmestani and B. L. Adams, Statistical continuum theory for characterization of heterogeneity using strain energy, Proceeding of the Plasticity Conference in Aruba, January 3-9, 2002.

  27. H. Garmestani, M. Fathi, G. Saheli, "Statistical Continuum Approaches Based On Parallel And Distributed Processing", The 2002 International Multi-conference in Computer Science, June 24-27 2002, Las Vegas, Nevada, USA.

  28. M.S. Al-Haik and H. Garmestani, ” Creep Prediction of Carbon Fiber/Epoxy Composite Using Neural Network” WAC (World Automation Congress), Orlando FL, June 9-13, 2002.

  29. L. Zhu, A. J. Beaudoin, H. Garmestani and S. R. MacEwen “An Assessment of In-Service Stress Relaxation of a Work-Hardened Aluminum Magnesium Alloy” paper for the NUMISHEET conference in Korea, 2002.

  30. S. R. Kalidindi, B. L. Adams, and H. Garmestani, Process design to achieve targeted microstructures, Proceeding of the Plasticity Conference in Aruba, January 3-9, 2002.

  31. G. Jefferson, B. L. Adams, S. Lin, R. Tannenbaum and H. Garmestani, Two point probability distribution functions: application to block co-polymer nanocomposites, Proceeding of the Plasticity Conference in Aruba, January 3-9, 2002.




  1. (2001)

  2. D. Li; H. Garmestani, “Texture Evolution in Ethylene-Octene Copolymer during Uniaxial Tension”, 50th Annual Denver X-ray Conference, Steamboat Springs, Colorado, July 2001

  3. D. Li, H Garmestani, S.R Kalidini, R. Alamo, “Texture Evolution and Morphology Evolution in High Density Polyethylene during Uniaxial Tension”, Bulletin of America Physics Society, March meeting, 2001, 203

  4. B. L. Adams, S. R. Kalidindi and H. Garmestani, “Spectral Representation of Microstructure Evolution in Polycrystals”, Proceeding of the TMS conference on Microstructure Modeling and Prediction During Thermomechanical Processing, Edited By: Raghavan Srinivasan, S. L. Semiatin, Armand Beaudoin, Steven Fox, Zhe Jin, Held November 4-8, 2001, Indianapolis, Indiana.

  5. H. Garmestani, “A Constitutive Model for Cyclic Loading and Relaxation”, Proceeding of the ASME publication for constitutive modeling of advanced materials, Orlando, Nov. 5-8, IMECE 2000 Dr. Marwan Khraisheh.

  6. Garmestani, M.S. Al-Haik and S. Downey, ”Durability Analysis of an Autoclave Structural Polymer Composite Using Stress Relaxation and Creep Data,” CANCOM 2001, Third Canadian International Composite Conference, Montréal (Quebec) Canada, August 21-24 2001.

  7. (2000)

  8. L. Meda, H. Garmestani, …“Residual Stress in Thin Films of Strontium-Doped Lanthanum Manganites” MRS, 2000 Spring Meeting, April 23-28, San Francisco, CA.

  9. H. Garmestani, s. Lin, b. L. Adams, “statistical continuum theory for characterization of heterogeneity in an inelasticly deforming body” Proceeding of the Multi-scale Modeling by Nasr Goneim, LosAngeles, 8/21/2000

  10. H. Garmestani1, S. R. Kalidindi2, L. Williams1, E. W. Lee3, O. S. Es-Said “Evolution of Anisotropy In Al-Li 2090-T8e41 Alloy”, Proceeding of the Plasticity 2000, Whistler, Canada, July 15-24, 2000.

  11. H. Garmestani, B. L. Adams, “Statistical Continuum Theory for Characterization of Heterogeneity in an Inelastic Deforming Body”, Proceeding of ICCE/7 International Committee on Composite Engineering, Denver, Co, July 2- June 8, 2000

  12. M.S. Al-Haik and H. Garmestani, ” Implicit Creep Model of Polymer Matrix Composites By Means Of Neural Network,” ICCE/7 Conference, Denver, Colorado, July 2-8, 2000.

  13. A.D. Sheikh-Ali, J.A. Szpunar and H. Garmestani, On the relationship between grain boundary sliding and intragranular slip during superplastic deformation, Superplasticity--Current Status and Future Potential (USA), Proceeding of MRS Fall Meeting, November 29 - December 3, 1999, Boston, Massachussets,193-198, 2000

  14. H. Garmestani, M. Al-Haik and S. Lin,” Statistical Continuum Mechanics Representation of Material Heterogeneity Using Neural Networks,” WAC 2000 Conference, Maui, Hawaii June 11-16, 2000.


(1999)

  1. H. Garmestani, S. Lin, “Statistical Continuum Theory for Inelastic Deformation of a Polycrystalline Medium”, Proceeding of ICCE/6 International Committee on Composite Engineering, Pullman, Washington, June 28-July3, 1999.

  2. “Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials”, K/ H. Dahmen, Nelly N. Mateeva, X. Dong, L. Meta, H. Garmestani Proceeding of ICCE/6 International Committee on Composite Engineering, June 28-July3, 1999.

  3. M. Al-Haik, H. Garmestani, and T. A. Townsley, ” A Concentric Cylinder Model for Residual Stress Prediction of High Temperature Titanium Aluminide Composite Materials,” ICCE/6, 6th Annual International Conference on Composites Engineering, Orlando Florida, June 27-July3 1999.

  4. “Residual stress development during fabrication and processing of Gamma Titanium based composites”, M. Al-Haik, T. A. Townsley, C. Sabinash, Proceeding of ICCE/6 International Committee on Composite Engineering, June 28-July3, 1999.

  5. “A phenomenological model for superplastic materials”, H. Garmestani and F. Booeshaghi, Proceedings of the Symposium on Superplasticity and Superplastic Forming, M. A. Khalil, Editor, As part of SES 98 Annual Meeting in Pullman, Wa, September 27-29, 1998.

  6. H. Garmestani, Unified Modeling of Inelastic Deformation Including Strain Transients in Cyclic Loading and Relaxation”, Presented at the special Symposium to honor Hart’s 80th Birthday, Proceedings of SES 98 Annual Meeting in Pullman, Wa, September 27-29, 1998.

  7. Statistical Continuum Mechanics Analysis of Composite Materials, H. Garmestani, S. Lin, B. Adams, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas.

  8. “Mechanical and Microscopy Analysis of Carbon Composites during high Temperature Application”, Shahawy, H. Garmestani, C. Goins, M. AlHaik, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas

  9. “Residual Stress and Texture in LD-MOCVD Processed Thin Film Giant Magnetoresistant (LaM)MnO3 Materials”, M. Li, E. Gillman, K.-H. Dahmen, X. Dong , L. Brandao, H. Garmestani, Proceeding of the ICCE/5-International Committee on Composite Engineering, July 5-11, 1998 in Las Vegas.

  10. “A Phenomenological Model For Aluminum Based Superplastic Materials”, H. Garmestani and F. Booeshaghi Proceedings of the International Conference on Plasticity by the International Committee on Plasticity, Juneau, Alaska, July 13-17, 1997

  11. “Unified Modeling of Cyclic Loading and Relaxation”, H. Garmestani Proceedings of the International Conference on Plasticity by the International Committee on Plasticity, Juneau, Alaska, July 13-17, 1997.

  12. “Phenomenological Modeling of Superplastic Al-7475”, F. Booeshaghi, H. Garmestani, P. N. Kalu, Light Weight Alloys for Aerospace Applications IV. Edited by E. W. Lee, W. E. Frazier, N. J. Kim, and K. Jatta. The Minerals, Metals & Materials Society, 1997.

  13. “Microstructural and Mechanical Properties Evaluations of Titanium Foils Processed via the Melt Overflow Process”, in NASA ACE Center Series: Proceedings of the NASA University Center Technical Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque, NM, vol,. 1, pages 925-929


(1997).

  1. “Texture Studies of Gamma Titanium Aluminide Sheets produced by melt overflow rapid solidification”, M. L. Weaver, H. Garmestani, G. Das, in High Ordered Intermetallic Alloys VII, Mat. Res. Soc. Symp. Proc., v. 460, pages 243-248 (1997)

  2. “A Novel Microcharacterization Technique in the Measurement of Strain and Orientation Gradient in Advanced Materials”, H. Garmestani, K. Harris, L. Lourenco, Proceedings of the NASA University Research Centers, in NASA ACE Center Series: Proceedings of the NASA University Research Center Technical Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque, NM, vol. 1, pages 931-936 (1997).

  3. “Microstructural and Mechanical Properties Evaluations of Titanium Foils Processed via the Melt Overflow Process”, M.L. Weaver and H. Garmestani, in NASA ACE Center Series: Proceedings of the NASA University Research Center Technical Conference on Education, Aeronautics, Space, Autonomy, Earth and Environment (URC_TC’97), ACE Center Press, Albuquerque, NM, vol. 1, pages 925-929 (1997).

  4. M.L. Weaver and H. Garmestani, “Texture Studies of Gamma Titanium Aluminide Sheets Produced By Melt Overflow Rapid Solidification,” to appear in the proceedings of the Materials Research Society Fall Meeting vol. 460, session on High Temperature Ordered Intermetallic Alloys VII, Boston, MA, Materials Research Society, November 1996.

  5. “Microstructural Characterization of Al8090 Superplastic Materials Using Orientation Imaging Microscopy“, Proceeding of the Microscopy Society of America Meeting in Kansas City, August 13-17, 1995. P

  6. “Low Cycle Fatigue of High Temperature Composite Materials”, N. Fox, H. Garmestani, Proceedings of the Second International Conference on Composite Engineering, Aug. 20-24, 1995. p237-238

  7. “Measurement of Thermal Stresses Using Non-Uniform Thermal Expansion in Inhomogeneous Materials”, H. Garmestani, L. Lourenco, M. Gholami, M. Ebrahimi, Proceedings of the Second International Conference on Composite Engineering, Aug. 20-24, 1995. PP245-246

  8. “Multi-Axial Investigation of High Field Composite Solenoids”, A. Cox, H. Garmestani, D. Markiewics, I. Dixon, Proceedings of the Second International Conference on Composite Engineering, Aug. 20-24, 1995. PP167-168.

  9. “Elastic-Plastic Analysis of a Composite Cylinder with Body Forces”, M. R. Vaghar, H. Garmestani, Proceedings of the Second International Conference on Composite Engineering, Aug. 20-24, 1995. PP 769-770

  10. “Microstructural Evolution and Characterization of Al-8090 Superplastic Materials”, H. Garmestani, P. Kalu, D. Dingley, Proceeding of the Light Weight Alloys for Aerospace Applications III, 124th Annual Meeting of TMS, Feb 12-16, 1995., PP177-187.

  11. “Rheological Modeling of Superplasticity”, F. Booeshaghi, H. Garmestani, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995. 169-170

  12. “Statistical Continuum Theory for Inelastic Behavior of a Two-Phase Medium”, H. Garmestani, S. Lin, B. Adams, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995.

  13. “Neural Network Based Simulation of Transient Behavior of Aluminum-1100”, Feteih, S., Tsai, J. Booeshaghi, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995. 155-156

  14. “Microscopic Strain Field Analysis”, K. Harris, H. Garmestani, L. Lourenco, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995. 211-212

  15. “Stress Analysis of a Superconducting Solenoid Using Green’s Function Solution”, M.R. Vaghar and H. Garmestani, Proceedings of the 32nd annual meeting of the Society of Engineering Sciences, October 29-November 2, 1995. 631-632

  16. "Statistical Continuum Theory For Inelastic Behavior of A Two-Phase Medium", H. Garmestani, Proceedings of the 14th Imacs World congress on Computational and Applied Mathematics, Atlanta, Georgia, July 11-15, vol. 1, pp 183, 1994.

  17. "Investigation of Deformation Mechanisms of Superplastic Materials Using Diffraction Patterns", H. Garmestani, G.S. Sohi, S. Mukherjee, N. Chandra, Superplasticity and Superplastic Forming of Advanced Materials, 10 Pages, Ed. N. Chandra et. al., TMS Publications, 1993.

  18. "Experimental and Numerical investigation of Superplastic Forming", N Chandra, H. Garmestani, International Conference on Superplasticity in Advanced Materials, ICSAM'94, May 24-26, 1994, Moscow, Russia.

  19. "Effect of Interfacial Properties on the Transverse Mechanical Behavior of Metallic/Intermetallic Matrix Composites- A Computational Study," C.R. Ananth., N. Chandra, K. Murali, H. Garmestani, Proceedings of the Fall meeting of The Minerals, Metals, & Materials Society (TMS) and ASM International, Pittsburgh, PA, October 17-21, 1993. TMS Publication.

  20. "Elastoplastic Analysis of Process Induced Residual Stresses in Metallic/Intermetallic Matrix Composites", C. R. Ananth, N. Chandra, H. Garmestani, Proceeding of the International Conference on computational plasticity, Barcelona, Spain, April 5-7,1992.

  21. "Process Induced Residual Stresses in Metallic/Intermetallic Matrix Composites", C. R. Ananth, N. Chandra, H. Garmestani, Computational Plasticity: Fundamentals and Applications, 1992, Ed. D.R.J. Owen, et. al., Pineridge Press, 2205-2216.

  22. “Controlled Inelastic Strain Rate Experiments”, Garmestani H., Hart E. W., JOM-J Min Met Mat S 40: (7) A55-A55 Jul 1988

  23. Biaxial small strain yield behavior in single-phase metal tubes,” Adams B. L., Raghavan R. K., Garmestani H., JOM-J MIN MET MAT S 36: (7) 60-60 1984




  1. Conferences organized:

  2. One of the organizers for the  First International Conference on Laser Peening (15th-17th December, 2008) Houston-Texas, USA

  3. Organized a session on Materials Design as part of the Plasticity    2009, St Thomas, Virgin Islands, USA, January 3-8, 2009

  4. Organized the 3rd International Joint Conference on Advanced Materials and Design- ISDT 2009 - Integrated Systems, Design and Technology - 

  5. Co-organized the Computational Materials Design symposium as part of MMM conference in Tallahassee, Fl on October 26-30, 2008.




PRESENTATIONS AND INVITED TALKS:

1   2   3   4   5   6

Похожие:

School of Materials Science and Engineering iconMaterials science & engineering

School of Materials Science and Engineering iconMaterials science and engineering department

School of Materials Science and Engineering iconNorthwestern University, Materials Science and Engineering Ph. D., July 1981

School of Materials Science and Engineering iconUniversity of Pennsylvania School of Engineering and Applied Science

School of Materials Science and Engineering iconMaterials Science and Engineering has initially merged metals, polymers, ceramics, and composites into a broad and unified treatment. Whereas the 20

School of Materials Science and Engineering icon1. Donald R. Askeland, Pradeep P. Phule. The Science and Engineering of Materials[M]. Fourth Edition. Tomson Learning 511 Forest Lodge Road Pacific Grove, ca

School of Materials Science and Engineering iconImportance of study of Engineering Mechanics / Strength of materials. Mechanical properties of materials Elasticity, Plasticity, Hardness, Toughness

School of Materials Science and Engineering iconЛитература R. E. Smallman, R. J. Bishop, Modern Physical Metallurgy and Materials Engineering, Science, process, applications Sixth Edition, Butterworth-Heinemann, (1999)
Циљ курса је проширивање знања из физичке металургије – грешке у кристалној структури, трансформационо и деформационо понашање
School of Materials Science and Engineering iconDr Lynette Fernandes (School of Medicine and Pharmacology) A/Prof Alan Everett (Physiology, School of Biomedical Biomolecular & Chemical Science)

School of Materials Science and Engineering iconInter american university of puerto rico bayamon campus school of engineering mechanical engineering department

Разместите кнопку на своём сайте:
Библиотека


База данных защищена авторским правом ©lib.znate.ru 2014
обратиться к администрации
Библиотека
Главная страница