Norwegian University of Science and Technology, Department of Materials Technology and Electrochemistry




Скачать 137.59 Kb.
НазваниеNorwegian University of Science and Technology, Department of Materials Technology and Electrochemistry
страница1/3
Дата09.10.2012
Размер137.59 Kb.
ТипДокументы
  1   2   3




CURRICULUM VITAE


NAME Øystein Grong


BORN 05-01-1956


AGE 47 years


NATIONALITY Norwegian


POSITION Professor (from 1987).


DEPARTMENT Norwegian University of Science and Technology, Department of Materials Technology and Electrochemistry.


EDUCATION MSc. (Siv.ing.) 1979, University of Trondheim, The Norwegian Institute of Technology, Department of Metallurgy.

PhD (Dr.ing.) 1983, University of Trondheim, The Norwegian Institute of Technology, Department of Metallurgy.


PROFESSIONAL

EXPERIENCE 1980-1981: Norwegian Defence Research Establishment, Kjeller, Norway.

1984-1985: Colorado School of Mines, Golden, Colorado (USA) and National Institute of Standards and Technology, Boulder, Colorado (USA).

1985-present: Norwegian University of Science and Technology, Department of Materials Technology and Electrochemistry (formerly Department of Metallurgy, University of Trondheim, The Norwegian Institute of Technology).


MAIN RESEARCH

FIELD Physical modelling of materials problems, with particular emphasis on welding, brazing, casting, and industrial heat treatment.


INTERNATIONAL

TEXTBOOKS Ø. Grong: "Metallurgical Modelling of Welding", The Institute of Materials, London, First Edition (1994), Second Edition (1997), 600 pp. Ranked among the top ten books (best sellers) from the Institute of Materials.


PUBLICATIONS Total number of publications (215), including textbooks & monographs (2) articles published in international journals with referee (76), chapters and articles published in international books (9), articles published in international conference proceedings (47), technical reports and notes (54), national publications (7), presentations and invited lectures (18), teaching materials (2).


GRADUATE STUDENTS MSc (siv.ing.) 49 (graduated)

2 (currently enrolled)

PhD (dr.ing.) 17 (graduated)

1 (currently enrolled)


INTERNATIONAL

COLLABORATION Colorado School of Mines, Golden (USA), National Institute of Standards and Technology, Boulder (USA), Oak Ridge National Laboratory (USA), University of Cambridge (UK), Universit­ät der Bundeswehr, Hamburg (Germany), Graz University of Technology (Austria), Katholicke Universiteit Leuven (Belgium), University of Grenoble (France), The Royal Institute of Technology (Sweden), Montana Tech (USA).

Professor Ø. Grong: List of publications and research activities.


Publications in refereed international journals and conference proceedings.


1. Ø. Grong, and N. Christensen: "Factors controlling MIG weld metal chemistry", Scandinavian Journal of Metallurgy, vol. 12 (1983), 155-165.


2. Ø. Grong, N. H. Rørå, and N. Christensen: "On the formation of CO in CO2-shielded welding", Scandinavian Journal of Metallurgy, vol. 13 (1984), 154-156.


3. Ø. Grong, N. Christensen, and D.L. Olson: "Carbon oxidation in hyperbaric MMA welding", Metal Construction, vol. 17 (1985), 810-814.


4. Ø. Grong, and D. K. Matlock: "Microstructural development in mild and low-alloy steel weld metals", International Metals Reviews, vol. 31 (1986), 27-48.


5. N. Christensen, and Ø. Grong: " Reactions of acid and weakly basic submerged arc fluxes", Scandinavian Journal of Metallurgy, vol. 15 (1986), 30-40.


6. O. M. Akselsen, Ø. Grong, N. Ryum, and N. Christensen: HAZ grain growth mechanisms in welding of low carbon microalloyed steels", Acta Metallurgica, vol. 34 (1986), 1807-1815.


7. M. Ramberg, Ø. Grong, and O. M. Akselsen: "Embrittlement phenomena in the intercritical HAZ of boron containing low carbon steels", Proc. Int. Confr. on Trends in Welding Research, Gatlinburg, Tennessee (USA),18-22 May 1986, Publ. ASM International (1987), pp. 679-684.


8. Ø. Grong, and O. M. Akselsen: "HAZ toughness of microalloyed steels for offshore", Metal Construction, vol. 18 (1986), 557-562.


9. Ø. Grong, T. A. Siewert, and G. R. Edwards: "Effects of deoxidation practice on the transformation behaviour and toughness of steel welds", Welding Journal, vol. 65 (1986), 279s-288s.


10. Ø. Grong, T. A. Siewert, G. P. Martins, and D. L. Olson: "A model for the silicon-manganese deoxidation of steel weld metals", Metallurgical Transactions A, vol. 17A (1986), 1797-1807.


11. N. A. Fleck, Ø. Grong, G. R. Edwards, and D. K. Matlock: "The role of filler metal wire and flux composition in submerged arc weld metal transformation kinetics", Welding Journal, vol. 65 (1986), 113s-121s.


12. O. M. Akselsen, Ø. Grong, and P. E. Kvaale: "A comparative study of the HAZ properties of boron containing low carbon steels", Metallurgical Transactions A, vol. 17A (1986), 1529-1536.


13. Ø. Grong, and N. Christensen: Effects of weaving on temperature distribution in fusion welding", Materials Science and Technology, vol. 2. (1986), 967-973.


14. O. M. Akselsen, Ø. Grong, and J. K. Solberg: "Structure property relationships in intercritical HAZ of low-carbon microalloyed steels", Materials Science and Technology, vol. 3 (1987), 649-655.

15. Ø. Grong, A. O. Kluken, and B. Bjørnbakk: "Effect of nitrogen on weld metal toughness in self-shielded flux-cored arc welding, Joining and Materials, vol. 1 (1988), 164-169.


16. O. M. Akselsen, J. K. Solberg, and Ø. Grong: "Effects of M-A islands on intercritical HAZ toughness of low carbon microalloyed steels", Scandinavian Journal of Metallurgy, vol. 17 (1988), 194-200.


17. A. O. Kluken, Ø. Grong, and J. Hjelen: "SEM based automatic image analysis of non-metallic inclusions in steel weld metals", Materials Science and Technology, vol. 4 (1988), 649-654.


18. O. M. Akselsen, G. Rørvik, M. I. Onsøien, and Ø. Grong: "Assessment and predictions of HAZ tensile properties of high-strength steels", Welding Journal, vol. 68 (1989), 356s-362s.


19. A. O. Kluken, and Ø. Grong: "Mechanisms of inclusion formation in Al-Ti-Si-Mn deoxidized steel weld metals", Metallurgical Transactions A, vol. 20A (1989), 1335-1349.


20. A. O. Kluken, and Ø. Grong. "Structure-property relationships in reheated SA steel weld metals", Proc. Int. Confr. on Trends in Welding Research, Gatlinburg Tennessee (USA), May 1989, Publ. ASM International (1990), 781-786.


21. M. I. Onsøien, O. M. Akselsen, Ø. Grong, and P. E. Kvaale: "Prediction of cracking resistance in steel weldments", Welding Journal, vol. 69 (1990), No. 1, 45-51.


22. O. R. Myhr, and Ø. Grong: "Dimensionless maps for heat flow analyses in fusion welding", Acta Metallurgica et Materialia, vol. 38 (1990), 449-460.


23. A. O. Kluken, Ø. Grong, and G. Rørvik: Solidification microstructures and phase transformations in Al-Ti-Si-Mn deoxidized steel weld metals", Metallurgical Transactions A, vol. 21A (1990), 2047-2058.


24. O. M. Akselsen, Ø. Grong, and G. Rørvik: "Embrittlement phenomena in the grain coarsened HAZ of low carbon microalloyed steels", Scandinavian Journal of Metallurgy, vol. 19 (1990), 258-264.


25. A. O. Kluken, Ø. Grong, and J. Hjelen: "The origin of transformation textures in steel weld metals containing acicular ferrite", Metallurgical Transactions A, vol. 22A (1991), 657-664.


26. O. R. Myhr, and Ø. Grong: "Process modelling applied to 6082-T6 aluminium weldments - Part I: Reaction Kinetics", Acta Metallurgica et Materialia, vol. 39(1991), 2693-2702.


27. O. R. Myhr, and Ø. Grong: "Process modelling applied to 6082-T6 aluminium weldments - Part II: Applications of model", Acta Metallurgica et Materialia vol. 39 (1991), 2703-2708.


28. T. Skaland, and Ø. Grong: "Nodule distribution in ductile cast iron", AFS Transactions, vol. 99 (1991), 153-157.


29. O. T. Midling, Ø. Grong, and M. Camping: "A first report on the microstructural integrity and mechanical performance of friction welded Al-SiC composites", Proc. 12th Ris­ö International Symposium on Metallurgy and Materials Science: Metal Matrix Composites, 2-6 September 1991 (Roskilde, Denmark), pp. 529-534.


30. O. T. Midling, Ø. Grong, and D. H. Bratland: "Modelling of the temperature distribution and microstructural evolution in the HAZ of friction welded 6082 aluminium alloys and Al-SiC metal matrix composites", Proc. 3rd Int. Confr. on Aluminium Alloys-Their Physical and Mechanical Properties, Trondheim, Norway, June, 1992. Publ. The Norwegian Inst. of Techn. vol. II, pp. 99-105.


31. H. R. Shercliff, Ø. Grong, O. R. Myhr, and M. F. Ashby: "Process modelling applied to age hardening aluminium alloys", Proc. 3rd Int. Confr. on Aluminium Alloys - Their Physical and Mechanical Properties, Trondheim, Norway, June 1992. Publ. The Norwegian Inst. of Techn., vol. III, pp. 357-369.


32. A. O. Kluken, and Ø. Grong: "Temper embrittlement in steel weld metals containing titanium and boron", Proc. 3rd. Int. Confr. on Trends in Welding Research, Gatlinburg, Tennessee, June, 1992. Publ. ASM International, pp. 569-574.


33. O. T. Midling, and Ø. Grong: "Continuous drive friction welding of SiC particulate reinforced aluminium composites ", Proc. 3rd. Int. Confr. on Trends in Welding Research, Gatlinburg, Tennessee, June, 1992, Publ. ASM International, pp. 1147-1151.


34. O. M. Akselsen, and Ø. Grong: "Prediction of weld metal Charpy V-notch toughness", Materials Science and Engineering, vol. A159 (1992), 187-192.


  1. O. T. Midling, and Ø. Grong: "Structure-property relationships in the HAZ of friction welded Al-SiC metal matrix composites", Proc. Int. Confr. Advanced Composites, Fabrication, Processing, Properties, Performance, Design & Application, Wollongon, Australia, February, 1993, Publ. University of Wollongon, pp. 1221-1226.




  1. T. Torvund, O. M. Akselsen, Ø. Grong, and J. H. Ulvensøen: "Vacuum brazing of alumina to AISI 304 austenitic stainless steel", Proc. 4th Int. Confr. on Joining Ceramics, Glass and Metal, K­öningswinter, Germany, May, 1993, Publ. Verlag der Deutschen Glastechnischen Gesellschaft (Frankfurt), pp. 256-263.


37. T. A. Skaland, Ø. Grong, and T. Grong: "A model for the graphite formation in ductile cast iron - Part I: Inoculation mechanisms", Metallurgical Transactions, vol. 24A (1993), 2321-2345.


38. T. A. Skaland, Ø. Grong, and T. Grong: "A model for the graphite formation in ductile cast iron" - Part II: Solid state transformation reactions", Metallurgical Transactions, vol. 24A (1993), 2347-2353.


39. D.H. Bratland, Ø. Grong, O. R. Myhr, and H. Shercliff: "Modelling of the quench sensitivity of aluminium alloy AA6082", Proc. Int. Conf. on Computer-Assisted Design and Process Simulation, Tokyo (Japan), September, 1993. Publ. The Iron and Steel Institute of Japan, pp. 135-141.


40. O. T. Midling, and Ø. Grong: "A process model for friction welding of Al-Mg-Si alloys and Al-SiC metal matrix composites" - Part I: "HAZ temperature and strain rate distribution", Acta Metallurgica et Materialia, vol. 42 (1994), 1595-1609.


41. O. T. Midling, and Ø. Grong: "A process model for friction welding of Al-Mg-Si alloys and Al-SiC metal matrix composites - Part II: "HAZ microstructure and strength evolution", Acta Metallurgica et Materialia, vol. 42 (1994), 1611-1622.


42. I. Andersen, A. O. Kluken, and Ø. Grong: "The origin of microstructure and hardness gradients within as-deposited steel weld metals", Welding Journal, vol. 72 (1993), No. 11, pp. 63-68.


43. I. Andersen, and Ø. Grong: "Analytical modelling of grain growth in metals and alloys in the presence of growing and dissolving precipitates - Part I: Normal grain growth", Acta Metallurgica et Materialia, vol. 43 (1995), 2673-2688.


44. I. Andersen, Ø. Grong, and N. Ryum: "Analytical modelling of grain growth in metals and alloys in the presence of growing and dissolving precipitates - Part II: Abnormal grain growth", Acta Metallurgica et Materialia , vol. 43 (1995) 2689-2700.


45. Ø. Grong, A. O. Kluken, H. K. Nylund, A. L. Dons, and H. Hjelen: "Catalyst effects in heterogeneous nucleation of acicular ferrite", Metallurgical and Materials Transactions, vol. 26A (1995), 525-534 .


46. D. H. Bratland, Ø. Grong, H. R. Shercliff, S. Tjøtta, and O. R. Myhr: "Process model based optimisation of cooling schedules for AA6082 extrusions", Proc. 4th Int. Conf. on Aluminium Alloys - Their Physical and Mechanical Properties, Vol.I, Atlanta (USA), September, 1994, Publ. Georgia Inst. of Techn.,pp. 418-425.


47. T. Torvund, O. M. Akselsen, Ø. Grong, and J. H. Ulvensøen: "Wettability of boron carbide", Proc. In Conf. Advanced Joining Techn. for New Materials II, Cocoa Beach, Florida (USA), March 1994, Publ. American Welding Society.


48. T. Torvund, O. M. Akselsen, Ø. Grong, and J. H. Ulvensøen: "TEM-examination of ceramic-metal interfaces", Proc. First Int. Conf. on High Temperature Capillarity, Bratislavia (Slovakia), May 1994, Publ. Slovak Academy of Sciences, pp. 155-159.


49. Ø. Grong, T. Grong, and T. Skaland: "Principle guidelines for new ferroalloy product developments",Proc. 7th Int. Ferroalloy Congress(INFACON 7), Trondheim (Norway), June, 1995. Publ. The Norwegian Ferroalloy Research Organization (FFF) and SINTEF Materials Technology, Trondheim, Norway, pp. 697-707.


50. H. Hoffmeister, L. Volden, and Ø. Grong: "Hydrogen induced weld cracking of duplex stainless steels as affected by shielding gas composition with TIG welding", Proc. Int. Confr. on Duplex Stainless Steels, Glasgow (Scotland), November 1994, Paper 54, Publ. The Welding Institute (1994).


51. T. Torvund, Ø. Grong, O. M. Akselsen, and J. H. Ulvensøen: "Wetting and joining of Al203 and Zr02 - toughened Al203 by pure Al and Ag-4wt% Ti filler metals", Proc. 4th Int. Confr. on Brazing, High Temperature Brazing and Diffusion Bonding (L­ÖT 95), Achen (Germany), June 1995, Publ. Deutsche Verband f­ür Schweisstechnik (1995), pp. 114-119.


52. B. Bj­örneklett, L. Anisdal, and Ø. Grong: Guidelines for designing shielding gas systems for laser welding of titanium", Proc. 5th Nordic Laser Materials Processing Conference (NOLAMP), Oslo (Norway), September 1995, Publ. SINTEF-SI (1995).


53. B. Bj­örneklett, Ø. Grong, L. Anisdal, E. Hellum, and V. Sande: "Wetting of dispersion strengthened aluminium by some Al-Si based braze alloys", Welding Journal, vol. 75, No. 3, pp. 57-62.


54. Ø. Grong: "An internal state variable approach to the modelling of solid state transformations in welds", Proc. 4th Int. Confr. on Trends in Welding Research, Gatlinburg (Tennessee), June 1995, Publ. ASM International (1995), pp.175-187.


55. D. H. Bratland, Ø. Grong, H. R. Shercliff, O.R. Myhr and S.Tjøtta: "Modelling of precipitation reactions in industrial processing-Overview No. 124", Acta Metallurgica et Materialia, vol. 45 (1997), 1-22.


56. Ø. Grong: "Modelling as a tool in alloy design for weldability", Proc. 5th Int. Confr. on Aluminium Alloys (ICAA-5)-Their physical and Mechanical Properties, Grenoble (France), July 1-5, 1996, Materials Science Forum, Vols. 217-222 (1996), pp. 107-120, Publ. Trans Tech Publications (Switzerland).


57. B. Bjørneklett, Ø. Grong, A. O. Kluken, and O. Jensrud: "Embrittlement phenomena in the HAZ of Al-Zn-Mg weldments", Proc. 5th Int. Confr. on Aluminium Alloys (ICAA-5)-Their physical and Mechanical Properties, Grenoble (France), July 1-5, 1996, Materials Science Forum, vols. 217-222 (1996), pp. 1527-1532, Publ. Trans Tech Publications (Switzerland).


58. T. Torvund, Ø. Grong, O. M. Akselsen, and J. H. Ulvensøen: "Brazing of ZrO2 toughened Al2O3 to stainless steel", Materials Science and Technology, vol. 13 (1997), 156-162.


59. T. Torvund, Ø. Grong, O. M. Akselsen, and J. H. Ulvensøen: "A process model for active brazing of ceramics- Part I: Growth of reaction layers", Journal of Materials Science, vol. 31 (1996), 6215-6222.


  1. T. Torvund, Ø. Grong, O. M. Akselsen, and J. H. Ulvensøen: "A model for coupled growth of reaction layers in reactive brazing of ZrO2-toughened Al2O3", Metallurgical and Materials Transactions, vol. 27A (1996), 3630-3638.




  1. D. Haaland, C. van der Eijk, and. Ø. Grong: “The role of interactive particles in steel”, Proc. Int. Symposium on Safety in Application of High Strength Steel, Trondheim (Norway), 1-2 July, 1997. Publ. Statoil Research Centre (1997).




  1. B. Schmid, R. Ødegård, and Ø. Grong: “Corrosion of alloys under low oxygen partial pressure at moderate high temperatures”, Proc. The European Corrosion Congress (EUROCORR’97), Trondheim (Norway), 22-25 September, 1997, Publ. Tapir (1997), pp. 17-22.




  1. L. Volden, Ø. Grong, and C. Thaulow: “ Residual stress distribution after welding of high strength low alloy quenched and tempered steels”, Proc. The 2’nd Int. Symposium on Thermal Stresses and Related Topics, Rochester, New York (USA), June 8-11, 1997, Editors: R. B. Hetnarski and N. Noda. Publ. Lastran Corporation Publishing Division (1997), pp. 399-402.




  1. T. Torvund, Ø. Grong, O. M. Akselsen, and J. H. Ulvensøen: "A process model for active brazing of ceramics- Part II: Optimisation of brazing conditions and joint properties", Journal of Materials Science, vol. 32 (1997), 4437-4442.




  1. M. I. Onsøien, Ø. Grong, G. Rørvik, A. Nordmark, and T. Skaland: “Design and development of treatment alloys for ductile cast iron”, Int. J. Cast Metals Res., vol. 10 (1997), 17-26.




  1. M. I. Onsøien, Ø. Grong, T. Skaland, and S. E. Olsen: “ Effects of rare earth metals on the microstructure evolution in ductile cast iron”, AFS Transactions, vol. 105 (1997), pp. 147-152.




  1. M. I. Onsøien, Ø. Grong, T. Skaland, and K. Jørgensen: “ Mechanisms of graphite formation in ductile cast iron containing rare earth metals”, Materials Science and Technology, vol. 15 (1999), 253-259.




  1. M. I. Onsøien, Ø. Grong, A. K. Dahle, and L. Arnberg: “ An internal state variable approach to the modelling of microstructure evolution during solidification”, Proc. 4th Decennial Int. Confr. on Solidification Processing, Sheffield (UK), 7-10 July, 1997. Publ. The University of Sheffield (1997), pp. 358-361.




  1. M. I. Onsøien, Ø. Grong, Ø. Gundersen, and T. Skaland: “ A process model for the microstructure evolution in ductile cast iron- Part I: The model”, Metallurgical and Materials Transactions, vol. 30A (1999), 1053-1068.




  1. M. I. Onsøien, Ø. Grong, Ø. Gundersen, and T. Skaland: “ A process model for the microstructure evolution in ductile cast iron- Part II: Applications of the model”, Metallurgical and Materials Transactions, vol. 30A (1999), 1069-1079.




  1. Ø. Grong, A. K. Dahle, M. I. Onsøien, and L. Arnberg: “Analytical modelling of equiaxed solidification”, Acta Materialia, vol. 46 (1998), 5045-5052.




  1. M. G. Mousavi, C. E. Cross, Ø. Grong, and M. Hval:” Controlling weld metal dilution for optimised weld performance in aluminium”, Science and Technology of Welding and Joining, vol. 2 (1997), 275-278.




  1. H. Hemmer, Ø. Grong, and S. Klokkehaug: “A process model for electron beam welding of duplex stainless steels”, Proc. 6th Int. Confr. on Welding and Melting by Electron and Laser Beams, Toulon (France), 15-19 June, 1998. Publ. Institut de Soudure, Paris (1998), pp. 31-38.




  1. O. R. Myhr, Ø. Grong, S. Klokkehaug, H. G. Fjær, and A. O. Kluken: “ A process model for welding of Al-Mg-Si extrusions- Part I: Precipitate stability”, Science and Technology of Welding and Joining, vol. 2 (1997), 245-253.




  1. O. R. Myhr, S. Klokkehaug, Ø. Grong, H. G. Fjær, and A. O. Kluken: “Modelling of microstructure evolution, residual stresses and distortions in 6082-T6 aluminium weldments”, Welding Journal, vol. 77 (1998), 286s-292s.




  1. B. I. Bjørneklett, Ø. Grong, O. R. Myhr, and A. O. Kluken: “ Additivity and isokinetic behaviour in relation to particle dissolution”, Acta Materialia, vol. 46 (1998), 6257-6266.




  1. Ø. Frigaard, Ø. Grong, and O. T. Midling: “Modelling of heat flow phenomena in friction stir welding of aluminium alloys”, Proc. Int. Confr. on Joints in Aluminium (INALCO’98), Abington, Cambridge (UK), 15-17 April, 1998. Publ. The Welding Institute (1998), vol. 2, pp.197-207.




  1. C. E. Cross, and Ø. Grong: “Microstructure and mechanical properties of simulated Al-Mg-Zn weld metal modified with Sc and Zr”, Proc. 6th Int. Confr. on Aluminium Alloys (ICAA-6)-Their physical and Mechanical Properties, Toyohashi (Japan), Vol. 3, Editors: T. Sato, S. Kumai, T. Kobayashi, and Y. Murakami, Publ. The Japan Institute of Light Metals (1998), pp. 1441-1446.




  1. Ø. Frigaard, B. I. Bjørneklett, Ø. Grong, and O. T. Midling: “ Process modelling applied to friction stir welding of Al-Mg-Si alloys”, Proc. 6th Int. Confr. on Aluminium Alloys (ICAA-6)-Their physical and Mechanical Properties, Toyohashi (Japan), Vol. 3, Editors: T. Sato, S. Kumai, T. Kobayashi, and Y. Murakami, Publ. The Japan Institute of Light Metals (1998), pp. 1477-1482.




  1. B. I. Bjørneklett, Ø. Frigaard, Ø. Grong, O. R. Myhr, and O. T. Midling: “Modelling of local melting during friction stir welding of Al-Zn-Mg alloys”, Proc. 6th Int. Confr. on Aluminium Alloys (ICAA-6)-Their physical and Mechanical Properties, Toyohashi (Japan), Vol. 3, Editors: T. Sato, S. Kumai, T. Kobayashi, and Y. Murakami, Publ. The Japan Institute of Light Metals (1998), pp. 1531-1536.




  1. O. R. Myhr O. R. Myhr, S. Klokkehaug, H. G. Fjær, Ø. Grong, and, A. O. Kluken: “Modelling of microstructure evolution and residual stresses in processing and welding of 6082 and 7108 aluminium alloys”, Proc. 5th Int. Confr. on Trends in Welding Research, Pine Mountain (Georgia), June 1-5, 1998, Publ. ASM International (1999), pp. 233-238.




  1. C. van der Eijk, Ø. Grong, S. S. Babu, and S. A. David: “Effects of interactive particles on steel weldability”, Proc. 5th Int. Confr. on Trends in Welding Research, Pine Mountain (Georgia), June 1-5, 1998, Publ. ASM International (1999), pp. 729-734.




  1. B. I. Bjørneklett, Ø. Grong, O. R. Myhr, and A. O. Kluken: “A process model for the microstructure evolution in Al-Zn-Mg weldments”, Metallurgical and Materials Transactions, vol. 30A (1999), 2667-2677.




  1. B. I. Bjørneklett, Ø. Grong, O. R. Myhr, and A. O. Kluken: “Modelling of grain boundary liquation in Al-Zn-Mg weldments”, Science and Technology of Welding and Joining, vol. 4 (1999), 161-169.




  1. H. Hemmer, and Ø. Grong: “Prediction of penetration depths during electron beam welding”, Science and Technology of Welding and Joining, vol. 4 (1999), 219-225.




  1. H. Hemmer, and Ø. Grong: “ A process model for the microstructure evolution in duplex stainless steel weldments- Part I: The model”, Metallurgical and Materials Transactions, vol. 30A (1999), 2915-2929.




  1. H. Hemmer, Ø. Grong, and S. Klokkehaug: A process model for the microstructure evolution in duplex stainless steel weldments- Part II: Application to EB welding”, Metallurgical and Materials Transactions, vol. 31A (2000), 1035-1048.




  1. M. G. Mousavi, C. E. Cross, and Ø. Grong: ”Effect of scandium and titanium-boron on grain refinement and hot cracking of aluminium alloy 7108. ”, Science and Technology of Welding and Joining, vol. 4 (1999), 381-388.




  1. C. E. Cross, Ø. Grong, and M. G. Mousavi: “A model for equiaxed grain formation along the weld metal fusion line”, Scripta Materialia, vol. 40 (1999), 1139-1144.




  1. M. G. Mousavi, C. E. Cross, and Ø. Grong: ”The effect of high temperature eutectic forming impurities on aluminium 7108 weldability”, Welding Journal (submitted).




  1. Ø. Frigaard, Ø. Grong, B. I. Bjørneklett, and O. T. Midling: “Modelling of the thermal and microstructure fields during friction stir welding of aluminium alloys”, Proc. First International Symposium on Friction Stir Welding, Thousand Oaks, California, USA, 14-16 June, 1999. Publ. The Welding Institute (1999).




  1. Ø. Frigaard, Ø. Grong, J. Hjelen, S. Gulbrandsen-Dahl, and O. T. Midling: “Characterisation of the subgrain structure in friction stir welded aluminium alloys using the SEM-EBSD technique”, Proc. First International Symposium on Friction Stir Welding, Thousand Oaks, California, USA, 14-16 June, 1999. Publ. The Welding Institute (1999).




  1. A. Y. Philipenko, V. A. Karkhin, Ø. Grong, and E. Halmøy: ”Simulation of thermal cycles in multi-electrode submerged arc welding”, Proc. International Confr. LUT Join’99, Lappeenranta, Finland, 25-27 August, 1999, Publ. Lappeenranta Technical University (1999).




  1. M. I. Onsøien, T. Skaland, and Ø. Grong
  1   2   3

Похожие:

Norwegian University of Science and Technology, Department of Materials Technology and Electrochemistry iconPredoctoral Research Assistant: Agricultural University of Athens, Department of Food Science and Technology, Athens, Greece. (1988-1991 & 1992-1993)

Norwegian University of Science and Technology, Department of Materials Technology and Electrochemistry iconOnno Boxma, Department of Mathematics and Computer Science Eindhoven University of Technology, Two-dimensional workload processes and two-dimensional insurance processes II

Norwegian University of Science and Technology, Department of Materials Technology and Electrochemistry iconDepartment of Science and Technology Studies

Norwegian University of Science and Technology, Department of Materials Technology and Electrochemistry iconDepartment of food science and technology handbook

Norwegian University of Science and Technology, Department of Materials Technology and Electrochemistry icon1995) Feminist and Constructivist Perspectives on New Technology [Special issue]. Science, Technology and Human Values 20 (3)

Norwegian University of Science and Technology, Department of Materials Technology and Electrochemistry iconJordan University of Science and Technology

Norwegian University of Science and Technology, Department of Materials Technology and Electrochemistry iconHong Kong University of Science and Technology

Norwegian University of Science and Technology, Department of Materials Technology and Electrochemistry iconNational Taiwan University of Science and Technology

Norwegian University of Science and Technology, Department of Materials Technology and Electrochemistry iconCity university of hong kong department of physics and materials science

Norwegian University of Science and Technology, Department of Materials Technology and Electrochemistry iconAlfred p. Sloan foundation фонд альфреда п. Слоуна направление
Наука и техника, высшее образование, экономика, математика, физика, проблемы женщин, иммиграции. Science and Technology, Standard...
Разместите кнопку на своём сайте:
Библиотека


База данных защищена авторским правом ©lib.znate.ru 2014
обратиться к администрации
Библиотека
Главная страница