Butler Manufacturing February 2012




Скачать 233.35 Kb.
НазваниеButler Manufacturing February 2012
страница1/6
Дата09.10.2012
Размер233.35 Kb.
ТипДокументы
  1   2   3   4   5   6
Butler Manufacturing February 2012

PO Box 419917

Kansas City, Missouri 64141

Phone 816-968-3000

Website www.butlermfg.com

Product Guide Specification

Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat, and PageFormat, as described in The CSI Construction Specifications Practice Guide.

This section must be carefully reviewed and edited by the Architect or Engineer to meet the requirements of the project and local building code. Coordinate this section with other specification sections and the Drawings. Delete all “Specifier Notes” after editing this section.

Section numbers and titles are from MasterFormat 2011 Update.

  1. 13 34 19

METAL BUILDING SYSTEMS

Specifier Notes: This section covers Butler Manufacturing metal building system. Consult Butler Manufacturing for assistance in editing this section for the specific application.

    1. GENERAL

      1. SECTION INCLUDES

        1. Metal Building System:

Specifier Notes: Edit the following list as required for the project. List only significant generic types of systems and products. Do not include accessories or detail list of materials.

          1. Structural steel framing system.

          2. Metal roof system.

          3. Metal wall system.

          4. Roof and wall insulation systems.



      1. RELATED REQUIREMENTS

Specifier Notes: Limit the following list to sections with specific information that the reader might expect to find in this section, but is specified elsewhere. Include section number and title for each section.

        1. Section __________ – ____________________.

        2. Section __________ – ____________________.

      1. REFERENCE STANDARDS

Specifier Notes: List standards referenced in this section, complete with designations and titles. Delete standards not included in the edited section.

        1. American Institute of Steel Construction (AISC):

          1. AISC Specification for Structural Steel Buildings.

          2. AISC Serviceability Design Considerations for Low-Rise Buildings.

        2. American Iron and Steel Institute (AISI):

          1. AISI North American Specification for the Design of Cold-Formed Steel Structural Members.

        3. American Welding Society (AWS):

          1. AWS D1.1 / D1.1M – Structural Welding Code – Steel.

          2. AWS D1.3 / D1.3M – Structural Welding Code – Sheet Steel.

        4. Association for Iron & Steel Technology (AISE):

          1. AISE 13 – Specifications for Design and Construction of Mill Buildings.

        5. ASTM International (ASTM):

          1. ASTM A 325 – Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength.

          2. ASTM A 653 / A 653M – Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process.

          3. ASTM A 792 / A 792M – Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process.

          4. ASTM B 117 – Standard Practice for Operating Salt Spray (Fog) Apparatus.

          5. ASTM C 518 – Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus.

          6. ASTM C 1363 – Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus.

          7. ASTM D 522 – Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings.

          8. ASTM D 523 – Standard Test Method for Specular Gloss.

          9. ASTM D 968 – Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive.

          10. ASTM D 1308 – Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes.

          11. ASTM D 2244 – Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates.

          12. ASTM D 2247 – Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity.

          13. ASTM D 2794 – Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact).

          14. ASTM D 3361 – Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings.

          15. ASTM D 4214 – Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films.

          16. ASTM E 84 – Standard Test Method for Surface Burning Characteristics of Building Materials.

          17. ASTM E 96 / E 96M – Standard Test Methods for Water Vapor Transmission of Materials.

          18. ASTM E 1592 – Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference.

          19. ASTM G 87 – Standard Practice for Conducting Moist SO2 Tests.

        6. FM Global:

          1. FMRC Standard 4471 – Approval Standard for Class 1 Roofs for Hail Damage Resistance, Combustibility, and Wind Uplift Resistance.

        7. Metal Building Manufacturers Association (MBMA):

          1. MBMA Metal Building Systems Manual.

        8. North American Insulation Manufacturers Association (NAIMA):

          1. NAIMA 202 – Standard For Flexible Fiber Glass Insulation to be Laminated for Use in Metal Buildings.

        9. The Society for Protective Coatings (SSPC):

          1. SSPC-Paint 25 - Primer for Use Over Hand Cleaned Steel performs to SSPC-Paint 25 standards.

          2. SSPC-SP2 – Hand Tool Cleaning.

        10. Underwriters Laboratories (UL):

          1. UL 580 – Standard for Tests for Uplift Resistance of Roof Assemblies.

          2. UL 723 – Standard for Test for Surface Burning Characteristics of Building Materials.

        11. US Army Corps of Engineers (COE):

          1. COE Unified Facilities Guide Specification Section 07 61 13.

Specifier Notes: Edit preinstallation meetings as necessary. Delete if not required.

      1. PREINSTALLATION MEETINGS

        1. Convene preinstallation meeting 2 weeks before start of installation of metal building system.

        2. Require attendance of parties directly affecting work of this section, including Contractor, Architect, Engineer, installer, and metal building system manufacturer’s representative.

        3. Review materials, installation, protection, and coordination with other work.

      2. SUBMITTALS

Specifier Notes: Edit submittal requirements as necessary. Delete submittals not required.

        1. Comply with Section 01 33 00 – Submittal Procedures.

        2. Product Data: Submit metal building system manufacturer’s product information, specifications, and installation instructions for building components and accessories.

        3. Erection Drawings: Submit metal building system manufacturer’s erection drawings, including plans, elevations, sections, and details, indicating roof framing, transverse cross-sections, covering and trim details, and accessory installation details to clearly indicate proper assembly of building components.

Specifier Notes: Fill in name of state where project is located.

        1. Certification: Submit written “Certificate of design and manufacturing conformance” prepared and signed by a Professional Engineer, registered to practice in ____________ verifying that the metal building system design and metal roof system design (including panels, clips, and support system components) meet indicated loading requirements and codes of authorities having jurisdiction.

          1. Certification shall reference specific dead loads, live loads, snow loads, wind loads/speeds, tributary area load reductions (if applicable), concentrated loads, collateral loads, seismic loads, end-use categories, governing code bodies, including year, and load applications.

          2. Submit certification 1 week before bid date on the metal building system manufacturer’s letterhead.

Specifier Notes: Specify one or more of the following three sentences. For Factory Mutual identify the proper classification.

        1. Submit certification verifying that the metal roof system has been tested and approved by Underwriter’s Laboratory as Class 90.

        2. Submit certification verifying that the metal roof system has been tested and approved by Factory Mutual as Class ________.

        3. Submit certification verifying that the metal standing seam roof system has been tested in accordance with ASTM E 1592 test protocols.

        4. Dealer Certification: Submit certification 1 week before bid date that the metal building system supplier or metal roof system supplier is a manufacturer’s authorized and franchised dealer of the system to be furnished.

          1. Certification shall state date on which authorization was granted.

        5. Installer Certification: Submit certification 1 week before bid date that the metal building system or roof system installer has been regularly engaged in the installation of building systems of the same or equal construction to the system specified.

        6. Warranty Documentation: Submit manufacturer’s standard warranty.

      1. QUALITY ASSURANCE

Specifier Notes: For more information about the IAS Inspection Program for Manufacturers of Metal Building Systems AC472, go to www.iasonline.org.

        1. Manufacturer’s Qualifications:

          1. Manufacturer regularly engaged, for past 10 years, in manufacture of metal building systems of similar type to that specified.

          2. Accredited based on IAS Accreditation Criteria AC472 and requirements in International Building Code (IBC), Chapter 17.

        2. Installer's Qualifications:

          1. Installer regularly engaged, for past 5 years, in installation of metal building systems of similar type to that specified.

          2. Employ persons trained for installation of metal building systems.

        3. Certificate of design and manufacturing conformance:

Specifier Notes: Fill in name of state where project is located.

          1. Metal building system manufacturer shall submit written certification prepared and signed by a Professional Engineer, registered to practice in ____________ verifying that building system design and metal roof system design (including panels, clips, and support system components) meet indicated loading requirements and codes of authorities having jurisdiction.

          2. Certification shall reference specific dead loads, live loads, snow loads, wind loads/speeds, tributary area load reductions (if applicable), concentrated loads, collateral loads, seismic loads, end-use categories, governing code bodies, including year, and load applications.

          3. Certificate shall be on metal building system manufacturer’s letterhead.

          4. Refer to Submittals article of this specification section.

        1. Material Testing:

          1. In addition to material certifications of structural steel, metal building system manufacturer shall provide, upon request at time of order, evidence of compliance with specifications through testing.

          2. This quality assurance testing shall include testing of structural bolts, nuts, screw fasteners, mastics, and metal coatings (primers, metallic coated products, and painted coil products).

      1. DELIVERY, STORAGE, AND HANDLING

        1. Delivery and Acceptance Requirements: Deliver materials to site in manufacturer’s original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.

        2. Storage and Handling Requirements:

          1. Store and handle materials in accordance with manufacturer’s instructions.

          2. Keep materials in manufacturer’s original, unopened containers and packaging until installation.

          3. Do not store materials directly on ground.

          4. Store materials on flat, level surface, raised above ground, with adequate support to prevent sagging.

          5. Protect materials and finish during storage, handling, and installation to prevent damage.

      2. WARRANTY

Specifier Notes: Specify one of the following two paragraphs. Specify the first paragraph for generic structural standing-seam roof systems. Specify the second paragraph for through-fastened or standing-seam roof systems.

        1. Metal building system manufacturer shall provide a written weathertightness warranty for a maximum of 25 years against leaks in roof panels, arising out of or caused by ordinary wear and tear under normal weather and atmospheric conditions.

          1. Warranty shall be signed by both the metal roof system manufacturer and the metal roof system installer.

          2. Maximum liability of warranty shall be no less than $0.70 per square foot of roof area.

        2. Metal building system manufacturer shall provide a written weathertightness warranty for a maximum of 10 years against leaks in roof panels, arising out of or caused by ordinary wear and tear under normal weather and atmospheric conditions.

          1. Warranty shall be signed by both the metal roof system manufacturer and the metal roof system installer.

          2. Maximum liability of warranty shall be no less than $0.20 per square foot of roof area.

        3. Metal building system manufacturer shall provide a written warranty for 25 years against perforation of metal roof panels due to corrosion under normal weather and atmospheric conditions.

          1. Warranty shall be signed by metal roof system manufacturer.

        4. Metal building system manufacturer shall provide a paint film written warranty for 25 years against cracking, peeling, chalking, and fading of exterior coating on painted roof and wall panels.

          1. Warranty shall be signed by metal building system or roof system manufacturer and state that the coating contains 70 percent “Kynar 500” or “Hylar 5000” resin.

          2. Metal building system manufacturer shall warrant that the coating shall not peel, crack, or chip for 25 years.

          3. For a period of 25 years, chalking shall not exceed ASTM D 4214, #8 rating and shall not fade more than 5 color difference units in accordance with ASTM D 2244.

        5. Metal Building System Manufacturer’s Certification: Metal building system manufacturer shall submit a signed written Certification 1 week before bid date, stating that the metal roof system manufacturer or approved representative will provide warranties and Inspection and Report Service specified in this specification section.

          1. Warranty terms shall be submitted with bid.

    1. PRODUCTS

      1. MANUFACTURER

        1. Metal Building System Manufacturer: Butler Manufacturing, PO Box 419917, Kansas City, Missouri 64141. Phone 816-968-3000. Website www.butlermfg.com.

  1   2   3   4   5   6

Похожие:

Butler Manufacturing February 2012 iconAlexander Matveyevich Matrosov (February 05, 1924 February 22 or 27, 1943), born in Yekaterinoslav (now Dnipropetrovsk) was a famous Soviet infantry soldier

Butler Manufacturing February 2012 iconStanding Committee 29 February 2012 For Information Review of Governing Body Business (Updated Paper 2007 and 2012)

Butler Manufacturing February 2012 iconSb 1 See Introductions on February 15, 2012. Sb 2

Butler Manufacturing February 2012 iconNew acquisitions february 1-29,2012

Butler Manufacturing February 2012 iconThe week: 27 January – 2 February 2012

Butler Manufacturing February 2012 iconRecent Acquisitions – February 2012

Butler Manufacturing February 2012 iconMembership Roster Short Version Revised: February 22, 2012

Butler Manufacturing February 2012 icon Title of Module being replaced (if any): n/a With effect fromvii: February 2012

Butler Manufacturing February 2012 iconMembership Roster Long Version Revised: February 22, 2012

Butler Manufacturing February 2012 iconUs polar Research Vessel Science Missions and Requirements February 2012

Разместите кнопку на своём сайте:
Библиотека


База данных защищена авторским правом ©lib.znate.ru 2014
обратиться к администрации
Библиотека
Главная страница