International Symposium on Advances in Applied Mechanics and Modern Information Technology




Скачать 20.17 Kb.
НазваниеInternational Symposium on Advances in Applied Mechanics and Modern Information Technology
Дата06.10.2012
Размер20.17 Kb.
ТипДокументы

International Symposium on Advances in Applied Mechanics and Modern Information Technology

22-23 September 2011, Baku, Azerbaijan

1

2

3

4

5

Manuscript Preparation for AAM&IT 2011, International Symposium on Advances in Applied Mechanics and Modern Information Technology

1

2

3

A. B. Surname1, C. D. Surname2

1

1Department of Civil Engineering, Suleyman Demirel University, Isparta, Turkey, e-mail

2Department of Machine Engineering, Odlar Yurdu University, Baku, Azerbaijan, e-mail

1

2

3

Abstract

1

This document template is designed to guide authors in writing their papers by direct editing. Alternatively, authors can use this manuscript and follow the guidelines to adjust format of their paper to the required form. This “abstract” section is limited to a maximum of 250 words. The authors are required to present a short summary of their study including their findings, conclusions and outcomes.

1

Keywords: this section should be written in italic and include a maximum of 5 keywords related with the study.

1

2

1 Introduction

1

Submission of full papers will be due to August 1, 2011. Paper submissions must be in electronic copy, in both Microsoft Word Document and Adobe Acrobat formats.

1

2

2 Guidelines

1

Authors should consider the following guidelines in writing their papers. The paper size must be customized to A4 size paper. The page setup must be adjusted such that all margins are 2.5 cm. The body text should be aligned to “justified” style and line spacing must be single.

1

Font type Times New Roman, size 10 pts should be used throughout the whole text (also for the line spaces). There should not be any underlined words. Spacing in the first page must be adjusted as follows: starting from the first line, enter 5 spaces and write the title of the paper (16 pts, Bold), enter 3 spaces and write name and surname of the authors as shown above (12 pts, Bold), enter 1 space and write the affiliation of each author to a separate line (10 pts), enter 3 spaces and write the title “abstract” (12 pts, Bold). Enter 1 space after the title. At the end of the abstract, enter 1 space and write the title “keywords” (10 pts, Bold, Italic, include maximum 5 keywords), enter 2 spaces and write the first section heading “introduction”. The maximum length of manuscript is 5 pages including figures and tables. Information on numbering and format for headings are given in the next section.

1

SI (international system) units must be used throughout the whole text.

1

2

3 Section Headings

1

Type each section heading in 12 pts, and number sequentially except for the References section. Enter 1 line space after section titles. Enter 2 line spaces between section titles and each paragraph within the body text.

1

3.1 Format for Subsection Headings

1

First subsection heading should be formatted with 12 pts font size and bold style. Enter 1 line space after these headings and 2 lines between subsection heading and each paragraph within the body text.

1

2

3.1.1 Format for Subsection Headings

1

Other subsection headings should be formatted with 11 pts font size and italic style. Enter 1 line space after these headings and 2 lines between subsection heading and each paragraph within the body text.

1

2

4 Tables and Figures

1

Use the same format for plain text in table and figure captions. The labeling and numbering must be written in bold characters. Table and figure captions must be centered and separated from the plain text with 1 line space. Tables and figures must also be separated by 1 line space from both the plain text and their captions. Both tables and figures should be adjusted to “in-line text” format and must be formatted to sit horizontally centered (please see Table 1 and Figure 1).

1

2

Table 1. This is the style for table captions

1

Column Header Goes Here

Column Header Goes Here

Column Header Goes Here

Row Name Here







Row Name Here







Row Name Here







1

2



1

Figure 1. Geometry of truncated conical shell


1

2

Adjust pictures, if any, to be in 300 dpi resolution (at most) and 150 dpi (at least) with a grey-scale color quality as shown in Figure 2.

1

2



1

Figure 2. Joint axes presentations for subspace λ=5

1

2

4 Equations

1

Equations should be written by using “Microsoft Word Equation Editor”. All Greek symbols and Latin symbols in the equations must be typed with “Times New Roman” style. Do not write text in equation editor as shown in Equation 1.

1

(1)

1

Equations must be formatted to be “in-line-text” using indentation of 1cm, with the equation number aligned to the right most of the page width. As in the format of tables and figures, there should be 1 line space between equations and both underlying and overlying paragraphs. The font sizes which should be used in equation editor are shown in Figure 3.

1

2



1

Figure 3. Format screen for equation editor.

1

2

The definition of each symbol or parameter in the equation can be given below the equation, after entering 1 line space.

1

2

References

1

Schnack, E. (1997). Lifetime maximization for mechanical engineering problems. Ageing of Materials and Methods for the Assessment of Lifetimes of Engineering Plant. Proceedings of CAPE 97, April 21-25, pp. 3- 16 Capetown, South Africa.

Eslami,M.R., Shahsiah, R. (2001). Thermal buckling of imperfect cylindrical shells. Journal of Thermal Stresses.Vol. 24, pp. 1-89.

Liew K.M., Peng L.X., Kitipornchai S. (2009). Vibration analysis of corrugated Reissner-Mindlin plates using a mesh-free Galerkin method. International Journal of Mechanical Sciences. Vol. 51, pp. 642-652.

Reddy, J. N. (2003). Mechanics of Laminated Composite Plates and Shells: Theory and Analysis. 2nd ed. CRC

Press Florida.

Lee, M.C. and Penzien, J. (1980). Stochastic seismic analysis of nuclear power plant structures and piping systems subjected to multiple support excitations. Report No: UCB/EERC-80/19, Earthquake Engineering Research Center, College of Engineering, University of California, Berkeley, CA.

Najafov, A. and Abdullayev A.H. (2009). The New Constructive Decision of a Mechanical Drive of Sucker-Rod Pumps. International Symposium on Engineering and Architectural Sciences of Balkan, Caucasus and Turkic Republics, October 22-24, Vol. II, pp.88-93 Isparta, Turkey.


References should be sorted in alphabetical order according to the surname of the first author in an ascending form. Numbering should not be used for references, and there should be no line space between subsequent references. References should be indented with 1 tab stop (use 0.5 cm for tab stop) from the left margin, except the first line of each reference (See the examples above). The references must be given in the text as the author(s) last name and the date in parentheses, such as (Eslami and Shahsiah, 2001). In the case of more than two authors, et al. should be used after following the first author, e.g. (Liew et al., 2009).


Похожие:

International Symposium on Advances in Applied Mechanics and Modern Information Technology iconSymposium: Advances In Acarology 2009

International Symposium on Advances in Applied Mechanics and Modern Information Technology iconTt tutorial Symposium: Recent Advances in Nanomagnetism

International Symposium on Advances in Applied Mechanics and Modern Information Technology iconAcademic and Applied Research in Military Science An International Journal of Security, Strategic, Defense Studies and Military Technology

International Symposium on Advances in Applied Mechanics and Modern Information Technology iconWill Advances in Reproductive Technology Affect Future Generations? Emily Cook, Angela Riley, Stephanie Lloyd ?? Laws, Technology and Public Belief

International Symposium on Advances in Applied Mechanics and Modern Information Technology iconГосударственное образовательное учреждение высшего профессионального образования
Иркутский государственный университет путей сообщения (Иргупс) проводит Второй международный научно-практический симпозиум «Инновации...
International Symposium on Advances in Applied Mechanics and Modern Information Technology iconModern era is a realm of technology and there is no way of denying the utility and necessity of computer technology. Applications of computers are increasing

International Symposium on Advances in Applied Mechanics and Modern Information Technology iconPh. D. in Mechanical Engineering and Applied Mechanics

International Symposium on Advances in Applied Mechanics and Modern Information Technology iconResearch of Applied Soil Mechanics 2004

International Symposium on Advances in Applied Mechanics and Modern Information Technology iconOn Modern Problems in Applied Mathematics

International Symposium on Advances in Applied Mechanics and Modern Information Technology icon1964 "Mechanics of Eddy Processes in the Tropical Troposphere" (with V. P. Starr), Pure and Applied Geophysics., 58

Разместите кнопку на своём сайте:
Библиотека


База данных защищена авторским правом ©lib.znate.ru 2014
обратиться к администрации
Библиотека
Главная страница